XC6401 Datasheet | Torex Semiconductor

XC6401series is Not Remended for New Designs. XC6401 Series Dual LDO Regulators, Low ESR Cap. patible ETR0309_007a - GENERAL DESCRIPTION The XC6401 series are highly accurate, Dual, low noise, CMOS LDO voltage regulators. Performance Features of the series includes low output noise, high ripple rejection ratio, low dropout and very fast turn-on times. The XC6401 includes a reference voltage source, error amplifiers, driver transistors, current limiters and phase pensators internally. The XC6401’s current limiters' foldback circuit also operates as a short protect for the output current limiter. The output voltage for each regulator is set independently by laser trimming. Voltages are selectable in 0.05V steps within a range of 0.8V to 5.0V. The XC6401 series is also fully patible with low ESR ceramic capacitors, reducing cost and improving output stability. This high level of output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance and high PSRR achieved across a broad range of frequencies. The EN function allows the output of each regulator to be turned off independently, resulting in greatly reduced power consumption. The XC6401 series is available in the SOT-26W or USP-6B, USP-6C ‘chip-scale’ package. - APPLICATIONS - Smat phones / Mobile phones - Portable games - Digital still cameras / camcorders - Digital audio equipment - Mobile devices / terminals - Features Maximum Output Current : More than 150m A (300m A limit) Dropout Voltage : 100m V @100m A Operating Voltage Range : 1.5V ~ 6.0V Output Voltage Range : 0.8V~5.0V (0.05V increments) Highly Accurate : ±2% (VOUT>1.5V) : ±30m V (VOUT≦1.5V) Low Power Consumption : 25μA (TYP.) Standby Current : Less than 0.1μA (TYP.) High Ripple Rejection : 70d B @1k Hz Operating Ambient Temperature : -40℃ ~ +85℃ Low ESR Capacitor patible : Ceramic capacitor Low Output...