Datasheet4U Logo Datasheet4U.com

TB62207BFG Datasheet Stepping Motor Driver/dc Motor Driver

Manufacturer: Toshiba

Overview: TOSHIBA TB62207BF TB62207BFG TOSHIBA BiCD Process Integrated Circuit - Silicon Monolithic TB62207BF TB62207BFG Stepping Motor Driver/DC Motor Driver Select, DC-DC Converter and Reset Driven by Chopper Microstep Pseudo Sine Wave The TB62207BF/BFG is a dual stepping motor driver./DC motor driver switching enabled, DC-DC converter and reset driven by chopper microstep pseudo sine wave. To drive a two-phase bipolar-type stepping motor, a 16-bit latch and a 16-bit shift register are built in the IC. The IC is suitable for driving stepping motors with low-torque ripple in a highly efficient manner. In addition, a signal axis can be switched to serve as a PWM driver for two DC motors. By equipping the stepping motor driver with Selectable Mixed Decay Mode for switching the attenuation ratio during chopping and also equipping it with a DC/DC converter, it is possible for the IC to supply external voltage. HSOP36-P-450-0.

This datasheet includes multiple variants, all published together in a single manufacturer document.

Key Features

  • The following motor combinations can be used (see p. 16-20 for pin locations) Stepper 1 dual axis 2 single axis 3 single axis 4 --5 --- DC Large DC (L) --single axis --single axis dual axis DC Small DC (S) ----- dual axis dual axis --- Weight: 0.79 g (typ. ) Note: Hereafter, DC Large will be referenced as DC (L) and DC Small will be referenced as DC (S).
  • Output Current Stepping Motor 1.0A (MAX) (single axis drive) DC Motor DC Large DC Small Varistor peak 8A (500ns) 4A (500.

TB62207BFG Distributor