TLP2361 Datasheet | Toshiba

Photocouplers Ga AℓAs Infrared LED & Photo IC 1. Applications - Factory Networking - High-Speed Digital Interfacing for Instrumentation and Control Devices - I/O Interface Boards 2. General The Toshiba TLP2361 consists of a high-output Ga AℓAs light-emitting diode coupled with integrated high gain, high-speed photodetectors. It is housed in the SO6 package. This photocoupler guarantees operation at up to 125  and on supplies from 2.7 V to 5.5 V. Since TLP2361 has guaranteed 1 m A low supply current (ICCL/ICCH), and 1.6 m A (Ta = 125 ) low threshold input current(IFHL), it contributes to energy saving of devices. It can drive directly from a microputer for a low input current. The TLP2361 has an internal Faraday shield that provides a guaranteed mon-mode transient immunity of ±20 k V/µs. 3. Features (1) Inverter logic type (Totem pole output) (2) Package: SO6 (3) Operating temperature: -40 to 125  (4) Supply voltage: 2.7 to 5.5 V (5) Data transfer rate: 15 MBd (typ.) (NRZ) (6) Threshold input current: 1.3 m A (max) (@Ta = 105 ) : 1.6 m A (max) (@Ta = 125 ) (7) Supply current: 1.0 m A (max) (8) mon-mode transient immunity: ±20 k V/µs (min) (9) Isolation voltage: 3750 Vrms (min) (10) Safety standards UL-approved: UL1577, File No.E67349 c UL-approved: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN60747-5-5 (Note 1) CQC-approved: GB4943.1, GB8898 Thailand Factory Note 1: When an EN60747-5-5 approved type is needed, please designate the Option (V4). ©2015 Toshiba Corporation Start of mercial production 2013-06 2015-11-02 Rev.5.0 4. Packaging and Pin Configuration 11-4L1S 5. Internal Circuit (Note) 1: Anode 3: Cathode 4: GND 5: VO (Output) 6: VCC Note: A 0.1-µF bypass capacitor must be connected between pin 6 and pin 4. 6. Principle of Operation 6.1. Truth Table Input H L LED ON OFF Output L H 6.2. Mechanical Parameters Characteristics Creepage distances Clearance distances Internal isolation...