TLP2367 Datasheet | Toshiba

Photocouplers Ga AℓAs Infrared LED & Photo IC 1. Applications - Factory Networking - High-Speed Digital Interfacing for Instrumentation and Control Devices - I/O Interface Boards 2. General The TLP2367 is 50-Mbps high speed photocoupler in small SO6 package. The TLP2367 consists of high-output Ga AℓAs light-emitting diode coupled with integrated high gain, high speed photodetector, and has high speed switching performance at operation temperature from -40  to 125  and at supply voltage from 2.7 V to 5.5 V. The detector has a totem-pole output stage with current sourcing and sinking capabilities. The TLP2367 has an internal Faraday shield that provides a guaranteed mon-mode transient immunity of ±25 k V/µs. 3. Features (1) Package: SO6 (2) Data transfer rate: 50 MBd (typ.) (NRZ) (3) Threshold input current: 4.0 m A (max) (4) Supply voltage: 2.7 to 5.5 V (5) Operating temperature: -40 to 125  (6) Propagation delay time: 20 ns (max) (7) Pulse width distortion: 8 ns (max) (8) Isolation voltage: 3750 Vrms (min) (9) Safety standards UL-approved: UL1577, File No.E67349 c UL-approved: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN60747-5-5, EN60065 or EN60950-1 (Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory Note 1: When an EN60747-5-5 approved type is needed, please designate the Option (V4). ©2016-2017 Toshiba Electronic Devices & Storage Corporation Start of mercial production 2016-05 2017-10-25 Rev.2.0 4. Packaging and Pin Assignment 11-4L1S 5. Internal Circuit (Note) 1: Anode 3: Cathode 4: GND 5: VO (Output) 6: VDD Note: A 0.1-µF bypass capacitor must be connected between pin 6 and pin 4. 6. Principle of Operation 6.1. Truth Table Input H L LED ON OFF Output L H 6.2. Mechanical Parameters Characteristics Creepage distances Clearance distances Internal isolation thickness Dimension(Min) Unit 5.0...