TLP2363 Datasheet | Toshiba

Photocouplers Infrared LED & Photo IC 1. Applications - Programmable Logic Controllers (PLCs) (IEC 61131-2) - Factory Automation (FA) - Measuring Instruments 2. General The Toshiba TLP2363 consists of a high-output light-emitting diode coupled with integrated high gain, highspeed photodetectors. This product guaratees operation at up to 105 - and on supplies from 2.7 to 5.5 V. It is housed in the SO6 package. The TLP2363 conbined with appropriate external ponents enables a 24 V digital input module to adhere to the IEC 61131-2 Type 1 specification. The TLP2363 has an internal Faraday shield that provides a guaranteed mon-mode transient immunity of ±20 k V/µs. 3. Features (1) Inverter logic type (open collector output) (2) Package: SO6 (3) Operating temperarure: -40 to 105 - (4) Supply voltage: 2.7 to 5.5 V (5) Data transfer rate: 15 Mbps (typ.) (6) Threshold input current: 5.0 m A (max) (7) Threshold input current: 0.3 to 2.4 m A (VCC = 3.3 V, RL = 1 kΩ) (8) Supply current: 4 m A (max) (9) mon-mode transient immunity: ±20 k V/µs (min) (10) Isolation voltage: 3750 Vrms (min) (11) Safety standards UL-recognized: UL 1577, File No.E67349 c UL-recognized: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory Note 1: When a VDE approved type is needed, please designate the Option (V4). ©2019-2021 Toshiba Electronic Devices & Storage Corporation Start of mercial production 2019-11 2021-01-12 Rev.3.0 4. Packaging and Pin Assignment 11-4L1S 5. Internal Circuit (Note) 1: Anode 3: Cathode 4: GND 5: VO (Output) 6: VCC Note: A 0.1-µF bypass capacitor must be connected between pin 6 and pin 4. 6. Principal of Operation 6.1. Truth Table Input H L LED ON OFF Output L H 6.2. Mechanical Parameters Characteristics Creepage distances Clearance distances Internal isolation...