Datasheet4U Logo Datasheet4U.com

TLP754 - Photocoupler

Key Features

  • (1) Inverter logic type (open collector output) (2) Package: DIP8 (3) Operating temperature: -40 to 125  (4) Supply voltage: -0.5 to 30 V (5) Threshold input current: 5.0 mA (max) (6) Supply current: 1.3 mA (max) (7) Propagation delay time: tpHL = 400 ns (max), tpLH = 550 ns (max) (8) Pulse width distortion: 400 ns (max) (9) Common-mode transient immunity: ±20 kV/µs (min) (10) Isolation voltage: 5000 Vrms (min) (11) Safety standards UL-approved: UL1577, File No. E67349 cUL-approved: CSA Componen.

📥 Download Datasheet

Datasheet Details

Part number TLP754
Manufacturer Toshiba
File Size 428.74 KB
Description Photocoupler
Datasheet download datasheet TLP754 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TLP750 Photocoupler Toshiba Semiconductor
TLP751 Photocoupler Toshiba Semiconductor
TLP759 Photocoupler Toshiba Semiconductor
TLP759IGM Photocoupler Toshiba Semiconductor
TLP700 Photocoupler Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TLP754F Photocoupler
TLP750F Photocoupler
TLP751F Photocoupler
TLP752 Photocoupler
TLP759F Photocoupler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Photocouplers GaAℓAs Infrared LED & Photo IC TLP754 TLP754 1. Applications • Intelligent Power Module Signal Isolation • Factory Automation (FA) • Industrial Inverters 2. General The TLP754 is a photocoupler in a DIP8 package that consists of a GaAℓAs infrared light-emitting diode (LED) optically coupled to an integrated high-gain, high-speed photodetector IC chip. It provides guaranteed performance and specifications at temperatures up to 125 .An internal noise shield provides a guaranteed common mode transient immunity of ±20 kV/µs. The TLP754 guarantees minimum and maximum of propagation delay time, pulse width distortion. Therefore it is suitable for isolation interface between IPM and control IC circuits in motor control application. 3.