MASWSS0067 Datasheet | Tyco Electronics

Features - - - - - - - 75 Ohm Impedance Positive Voltage Control (0 / +5 V) Input Terminated (Off State) Low Insertion Loss: 0.62 d B at 870 MHz High Isolation: 54 d B at 870 MHz 3 mm FQFP-N 12 Lead Package 0.5 micron Ga As PHEMT Process Functional Schematic GT1 N/C N/C GND RF1 G1 GND RF2 GND Description M/A-’s MASWSS0067 is a Ga As PHEMT MMIC single pole single throw (SPST) switch in a low cost 3 mm FQFP-N 12 lead package. The MASWSS0067 is ideally suited for applications where low control voltage, low insertion loss, high isolation, small size and low cost are required. Typical applications are to replace mechanical relays in CATV systems. This part can be used in all 75 ohm systems operating up to 1.0 GHz. The MASWSS0067 is fabricated using a 0.5 micron gate length Ga As PHEMT process. The process features full passivation for performance and reliability. V1 N/C V2 Pin Configuration PIN No. PIN Name Description 1 2 GND RF1 G1 V1 N/C V2 GND RF2 GND N/C N/C GT1 Ground RF In RF Ground Control 1 No Connection Control 2 Ground RF Out Ground No Connection No Connection RF Ground Ordering Information Part Number MASWSS0067 MASWSS0067TR Package 4 5 6 7 FQFP- N 12-lead Plastic Package 7 inch, 1000 piece reel MASWSS0067TR-3000 13 inch, 3000 piece reel MASWSS0067SMB Sample Test Board (Includes 5 Samples) 8 9 10 11 12 1. Reference Application Note M513 for reel size information. 2. The exposed pad centered on the package bottom must be connected to both RF and DC ground. M/A- Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit .ma. for additional data sheets and product information. 1 n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel. +81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1908) 574 200, Fax +44 (1908) 574 300 SPST High Isolation CATV Switch, 5 - 1000 MHz Electrical Specifications: TA = 25°C, VC = 0V / 5V, Z0 = 75 Ω 3 Parameter Insertion Loss...