MASWSS0068 Datasheet | Tyco Electronics

Features - - - - - - 75 Ohm Impedance Positive Voltage Control (0 / +5 V) Low Insertion Loss: 0.60 d B at 870 MHz High Isolation: 51 d B at 870 MHz 4 mm FQFP-N 20 Lead Package 0.5 micron Ga As PHEMT Process V1 Functional Schematic GND GT1 GND GT2 GND RF1 GND GND GND G1 RF2 GND GND GND G2 Description M/A-’s MASWSS0068 is a Ga As PHEMT MMIC single pole double throw (SPDT) switch in a low cost 4 mm FQFP-N 20 lead package. The MASWSS0068 is ideally suited for applications where low control voltage, low insertion loss, high isolation, small size and low cost are required. Typical applications are to replace mechanical relays in CATV systems. This part can be used in all 75 ohm systems operating up to 1.0 GHz. The MASWSS0068 is fabricated using a 0.5 micron gate length Ga As PHEMT process. The process features full passivation for performance and reliability. V1 RFC GND V2 Absolute Maximum Ratings 2 Parameter Max Input Power (5 - 1000 MHz, 5 V Control) Absolute Maximum +32 d Bm ±8.5 volts -40 o C to +85 o C -65 o C to +150 o C Ordering Information Part Number MASWSS0068 MASWSS0068TR Package Operating Voltage Operating Temperature Storage Temperature FQFP-N 20 Lead Plastic Package 7 inch, 1000 piece reel 2. Exceeding any one or bination of these limits may cause permanent damage to this device. MASWSS0068TR-3000 13 inch, 3000 piece reel MASWSS0068SMB Sample Test Board (Includes 5 Samples) Truth Table 3,4 V1 1 0 V2 0 1 RFC - RF1 On Off RFC - RF2 Off On 1. Reference Application Note M513 for reel size information. 3. External 0.01 µF DC blocking capacitors are required on all RF In/Out and RF Ground ports. 4. 0 = 0 V + 0.2 V; 1 = +2.5 V to +5 V. M/A- Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit .ma. for additional data sheets and product information. - North America: Tel. (800) 366-2266 - Asia/Pacific: Tel. +81-44-844-8296, Fax +81-44-844-8298 -...