XC610 Datasheet | XinChip

Description 1.1 Overview The XC610 chip is a very low power, high performance and highly integrated So C with Bluetooth 4.2 BLE transceiver. It integrates a high-performance 2.4GHz RF transceiver, rich features baseband, 32 bit MCU and various peripheral IOs. It support 1 Mbit FLASH and 128k Byte RAM to enable programmable protocol and profile to support customized applications. The XC610 is manufactured using advanced 55nm CMOS low leakage process,which offers highest integration, lowest power consumption, lowest leakage current and reduced BOM cost while simplifying the overall system design. Rich peripherals include an 4 channel general purpose ADC, power-on-reset(POR), 3axis Q-decoder,UART/SPI/I2C and up to 7 GPIOs, which further reduce overall system cost and size. The XC610 operates with a power range from 1.8 to 5.5V and very low power consumption in both Tx and Rx modes, enabling long lifetimes in battery-operated systems while maintaining excellent RF performance.The device can enter an ultra low power sleep mode in which the registers and retention memory content are retained while low power oscillator and sleep timer are ON. The SSOP/SOP16 (up to 7 GPIOs) Package is available 1.2 Block Diagram 1.3 Application - HID Application - Lighting Control - Wireless Sensor Networks - 3D Glassed - Proximity and Find Me 1.4 Features - Bluetooth 4.2 BLE RF SOC - Operation voltage 1.8 V to 5.5 V - -96 d Bm Sensitivity - -93 d Bm Sensitivity@low power - Maximum 10 d Bm output power - Low Jitter 32K RC oscillator - 32bit MCU Integrated - 4-wires ext.-FLASH Interface - 128 k Byte data RAM - I2Cs, SPI and UART Interface - 6-channel 10-bit General ADC - PWM - keyscan - 3 axis Q-decoder - Low Power Real Time Counter - <1 u A in Deep-sleep Mode - 12 u A in 128KB Retention Mode - 16 m A Transceiver RX Active - 20 m A Transceiver TX Active -  SSOP/SOP16 Package Datesheet V1.0 2 Pin Information The pin assignment for SSOP/SOP16 package is shown in picture...