Datasheet4U Logo Datasheet4U.com

AWR1642 - FMCW Radar sensor

General Description

The AWR1642 device is an integrated single-chip FMCW radar sensor capable of operation in the 76- to 81-GHz band.

The device is built with TI’s low-power 45-nm RFCMOS process and enables unprecedented levels of integration in an extremely small form factor.

Key Features

  • FMCW transceiver.
  • Integrated PLL, transmitter, receiver, Baseband, and ADC.
  • 76- to 81-GHz coverage with 4 GHz available bandwidth.
  • Four receive channels.
  • Two transmit channels.
  • Ultra-accurate chirp (timing) engine based on fractional-N PLL.
  • TX power: 12 dBm.
  • RX noise figure:.
  • 14 dB (76 to 77 GHz).
  • 15 dB (77 to 81 GHz).
  • Phase noise at 1 MHz:.
  • 95 dBc/Hz (76 to 77 GHz).

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AWR1642 SWRS203C – MAY 2017 – REVISED DECEMBER 2021 AWR1642 Single-Chip 77- and 79-GHz FMCW Radar sensor 1 Features • FMCW transceiver – Integrated PLL, transmitter, receiver, Baseband, and ADC – 76- to 81-GHz coverage with 4 GHz available bandwidth – Four receive channels – Two transmit channels – Ultra-accurate chirp (timing) engine based on fractional-N PLL – TX power: 12 dBm – RX noise figure: • 14 dB (76 to 77 GHz) • 15 dB (77 to 81 GHz) – Phase noise at 1 MHz: • –95 dBc/Hz (76 to 77 GHz) • –93 dBc/Hz (77 to 81 GHz) • Built-in calibration and self-test (monitoring) – Arm® Cortex®-R4F-based radio control system – Built-in firmware (ROM) – Self-calibrating system across process and temperature • C674x DSP for FMCW signal processing • On-chip memory: 1.