MSPM0G1106 Datasheet | Texas Instruments

Features - Core - Arm® 32-bit Cortex®-M0+ CPU with memory protection unit, frequency up to 80 MHz - Operating characteristics - Extended temperature: - 40°C up to 105°C - Wide supply voltage range: 1.62 V to 3.6 V - Memories - Up to 128KB of flash memory with built-in error correction code (ECC) - Up to 32KB of SRAM with hardware parity - High-performance analog peripherals - Two simultaneous sampling 12-bit 4-Msps analog-to-digital converters (ADCs) with up to 17 external channels - 14-bit effective resolution at 250-ksps with hardware averaging - One general-purpose amplifier (GPAMP) - Configurable 1.4-V or 2.5-V internal shared voltage reference (VREF) - Integrated temperature sensor - Integrated supply monitor - Optimized low-power modes - RUN: 96 µA/MHz (Core Mark) - SLEEP: 467 µA at 4 MHz - STOP: 46 µA at 32 k Hz - STANDBY: 1.5 µA with RTC and SRAM retention - SHUTDOWN: 80 n A with IO wakeup capability - Intelligent digital peripherals - 7-channel DMA controller - Two 16-bit advanced control timers support dead band insertion and fault handling - Seven timers supporting up to 22 PWM channels - One 16-bit general purpose timer - One 16-bit general purpose timer supports - Two 16-bit general-purpose timers support low-power operation in STANDBY mode - One 32-bit general-purpose timer - Two 16-bit advanced timers with deadband - Two window-watchdog timers - RTC with alarm and calendar mode - Enhanced munication interfaces - Four UART interfaces; one supports LIN, Ir DA, DALI, Smart Card, Manchester, and three support low-power operation in STANDBY mode - Two I2C interfaces supporting up to FM+ (1 Mbit/s), SMBus, PMBus, and wakeup from STOP mode - Two SPIs, one SPI supports up to 32 Mbits/s - Clock...