SN54AC374 Datasheet | Texas Instruments

Features - Operation of 2V to 6V VCC - Inputs accept voltages to 6V - Max tpd of 9.5ns at 5V - 3-state noninverting outputs drive bus lines directly - Full parallel access for loading 2 Description These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. PART NUMBER SNx4AC374 Device Information PACKAGE(1) PACKAGE SIZE(2) DB (SSOP, 20) 7.2mm x 7.8mm DW (SOIC, 20) 12.80mm x 10.3mm N (PDIP, 20) 24.33mm x 9.4mm NS (SOP, 20) 12.6mm x 7.8mm PW (TSSOP, 20) 6.50mm x 6.4mm BODY SIZE(3) 7.2mm x 5.30mm 12.80mm x 7.50mm 24.33mm x 6.35mm 12.6mm x 5.3mm 6.50mm x 4.40mm (1) For more information, see Section 10. (2) The package size (length × width) is a nominal value and includes pins, where applicable. (3) The body size (length × width) is a nominal value and does not include pins. Logic Diagram (Positive Logic) An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. SN54AC374, SN74AC374 SCAS543G - OCTOBER 1995 - REVISED FEBRUARY 2024 .ti. Table of Contents 1 Features 1 2 Description 1 3 Pin Configuration and Functions 3 4 Specifications 4 4.1 Absolute Maximum Ratings 4 4.2 Remended Operating Conditions 4 4.3 Thermal Information 5 4.4 Electrical Characteristics 5 4.5 Timing Requirements, VCC = 3.3 V ±...