SN74LV8153 Datasheet | Texas Instruments

.ti. SN74LV8153 SERIALĆTOĆPARALLEL INTERFACE SCLS555 - JUNE 2004 DESCRIPTION The SN74LV8153 is a serial-to-parallel data converter. It accepts serial input data and outputs 8-bit parallel data. The automatic data-rate detection feature of the SN74LV8153 eliminates the need for an external oscillator and helps with cost and board real-estate savings. The OUTSEL pin is used to choose between open collector and push-pull outputs. The open-collector option is suitable when this device is used in applications such as LED interface, where high drive current is required. SOUT is the output that acknowledges reception of the serial data. To ensure the high-impedance state during power up or power down, OE should be tied to VCC1 through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. N OR PW PACKAGE (TOP VIEW) VCC1 1 A0 2 A1 3 A2 4 D5 OUTSEL 6 RESET 7 OE 8 SOUT 9 GND 10 20 VCC2 19 Y0 18 Y1 17 Y2 16 Y3 15 Y4 14 Y5 13 Y6 12 Y7 11 GND FUNCTION TABLE (each buffer) INPUTS OUTSEL RESET OE OUTPUT OUTPUT Dn Yn STRUCTURE Open collector Push-pull In the open-collector mode (OUTSEL = L), the outputs are inverted, e.g., Y1 = l, when D1 = H Features D Single-Wire Serial Data Input D patible With UART Serial-Data Format D Up to Eight Devices (64-Bit Parallel) Can Share the Same Bus by Using Different binations of A0, A1, A2 D Up to 40 m A Current Drive in Open-Collector Mode for Driving LEDs D Outputs Can be Configured as Open-Collector or Push-Pull D Internal Oscillator and Counter...