Datasheet4U Logo Datasheet4U.com

74AUP1G19 - Low-power 1-of-2 decoder/demultiplexer

Description

The 74AUP1G19 is a 1-to-2 decoder/demultiplexer with a common output enable.

This device buffers the data on input A and passes it to the outputs 1Y (true) and 2Y (complement) when the enable (E) input signal is LOW.

A HIGH E causes both outputs to assume a HIGH state.

Features

  • Wide supply voltage range from 0.8 V to 3.6 V.
  • High noise immunity.
  • Low static power consumption; ICC = 0.9 µA (maximum).
  • Overvoltage tolerant inputs to 3.6 V.
  • Low noise overshoot and undershoot < 10 % of VCC.
  • IOFF circuitry provides partial Power-down mode operation.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8-12 (0.8 V to 1.3 V).
  • JESD8-11 (0.9 V.

📥 Download Datasheet

Datasheet preview – 74AUP1G19

Datasheet Details

Part number 74AUP1G19
Manufacturer nexperia
File Size 257.78 KB
Description Low-power 1-of-2 decoder/demultiplexer
Datasheet download datasheet 74AUP1G19 Datasheet
Additional preview pages of the 74AUP1G19 datasheet.

📁 Similar Datasheet

  • 74AUP1G11 - Low-power 3-input AND gate (NXP)
  • 74AUP1G125 - Low-power buffer/line driver (NXP Semiconductors)
  • 74AUP1G125 - SINGLE BUFFER GATE (Diodes)
  • 74AUP1G126 - Low-Power buffer/line driver (NXP)
  • 74AUP1G126 - SINGLE BUFFER GATE (Diodes)
  • 74AUP1G14 - Low-power Schmitt-trigger inverter (NXP)
  • 74AUP1G14 - SINGLE SCHMITT-TRIGGER INVERTER (Diodes)
  • 74AUP1G17 - Low-power Schmitt-trigger buffer (NXP)
  • 74AUP1G17 - SINGLE SCHMITT-TRIGGER BUFFER (Diodes)
  • 74AUP1G175 - Low Power D-Type Flip-Flop (NXP)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74AUP1G19 Low-power 1-of-2 decoder/demultiplexer Rev. 7 — 19 January 2022 Product data sheet 1. General description The 74AUP1G19 is a 1-to-2 decoder/demultiplexer with a common output enable. This device buffers the data on input A and passes it to the outputs 1Y (true) and 2Y (complement) when the enable (E) input signal is LOW. A HIGH E causes both outputs to assume a HIGH state. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device ensures very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power down applications using IOFF.
Published: |