NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver

onsemi

Key Features

Flexible: Dual Low.
Side, Dual High.
Side or Half.
Bridge Gate Driver.
4.5.
A Peak Source, 9.
A Peak Sink Output Current Capability.
Independent UVLO Protections for Both Output Drivers.
Output Supply Voltage from 6.5 V to 30 V with 5.
V and 8.
V for MOSFET, 13.
V and 17.
V UVLO for SiC, Thresholds.
Common Mode Transient Immunity CMTI > 200 V/ns.
Propagation Delay Typical 36 ns with  5 ns Max Delay Mat.

NCV51563 4.5-a/9-a isolated dual channel gate driver by onsemi - Datasheet Preview

Datasheet Details

Part number	NCV51563
Manufacturer	onsemi
File Size	3.62 MB
Description	4.5-A/9-A Isolated Dual Channel Gate Driver
Datasheet	NCV51563 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
NCV51561	Dual Channel Gate Driver	ON Semiconductor
NCV51510	Termination Source / Sink Regulator	ON Semiconductor
NCV51511	High Side and Low Side Gate Driver	ON Semiconductor
NCV51513	Automotive 130V High and Low Side Driver	ON Semiconductor
NCV5104	Half Bridge Driver	ON Semiconductor

Other Datasheets by onsemi

Part Number	Description
NCV51153	4.5-A/9-A Isolated Single Channel Gate Driver
NCV3025833	Smart Power Stage
NCV70628	Micro-stepping Motor Driver
NCV7410	Automotive Ethernet Transceiver
NCV78514	1-Channel Automotive LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

5 kVRMS, 4.5-A/9-A Isolated Dual Channel Gate Driver NCV51563 The NCV51563 are isolated dual−channel gate drivers with 4.5−A/9−A source and sink peak current respectively. They are designed for fast switching to drive power MOSFETs, and SiC MOSFET power switches. The NCV51563 offers short and matched propagation delays. Two independent and 5 kVRMS internal galvanic isolation from input to each output and internal functional isolation between the two output drivers allows a working voltage of up to 1850 VDC. This driver can be used in any possible configurations of two low side, two high−side switches or a half−bridge driver with programmable dead time. An ENA/DIS pin shutdowns both outputs simultaneously when set low or high for ENABLE or DISABLE mode respectively.