| Part Number | 74HC374 Datasheet |
|---|---|
| Manufacturer | onsemi |
| Overview |
74HC374 Octal 3−State Non−Inverting D Flip−Flop
High−Performance Silicon−Gate CMOS
The 74HC374 is identical in pinout to the LS374. The device inputs are compatible with standard CMOS outputs; with pu.
http://onsemi.com MARKING DIAGRAM
20 20 1 TSSOP *20 DT SUFFIX CASE 948E 1 HC 374 ALYW G G * * * * * * * * * Output Drive Capability: 15 LSTTL Loads Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2.0 to 6.0 V Low Input Current: 1.0 mA High Noise Immunity Characteristic of. |
74HC374 Datasheet PDF
The 74HC374 is a Octal 3-State Non-Inverting D Flip-Flop.
| Part Number | 74HC374 Datasheet |
|---|---|
| Description | Octal D-type flip-flop |
| Manufacturer | Nexperia |
| Overview | The 74HC374; 74HCT374 is an octal positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of . a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does . |
| Part Number | 74HC374 Datasheet |
|---|---|
| Description | Octal Edge-Triggered D-Type Flip-Flops |
| Manufacturer | Texas Instruments |
| Overview |
These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers,.
* Wide Operating Voltage Range of 2 V to 6 V * High-Current 3-State True Outputs Can Drive Up to 15 LSTTL Loads * Eight D-Type Flip-Flops in a Single Package * Full Parallel Access for Loading * Low Power Consumption, 80-µA Max ICC * Typical tpd = 14 ns * ±6-mA Output Drive at 5 V * Low Input Curren. |