Datasheet4U Logo Datasheet4U.com

74LVC126A Datasheet

The 74LVC126A is a Low-Voltage CMOS Quad Buffer. Download the datasheet PDF and view key features and specifications below.

Part Number74LVC126A
Manufactureronsemi
Overview 74LVC126A Low-Voltage CMOS Quad Buffer With 5 V−Tolerant Inputs and Outputs (3−State, Non−Inverting) The 74LVC126A is a high performance, non−inverting quad buffer operating from a 1.2 to 3.6 V suppl.
* Designed for 1.2 to 3.6 V VCC Operation
* 5.0 V Tolerant − Interface Capability With 5.0 V TTL Logic
* Supports Live Insertion and Withdrawal
* IOFF Specification Guarantees High Impedance When VCC = 0 V
* 24 mA Output Sink and Source Capability
* Near Zero Static Supply Current in all Three Logic.
Part Number74LVC126A
DescriptionQuad buffer/line driver
ManufacturerNexperia
Overview The 74LVC126A is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A LOW on nOE causes the outputs to assume a high impedance OFF-state. Inputs can be driven. and benefits
* Overvoltage tolerant inputs to 5.5 V
* Wide supply voltage range from 1.2 V to 3.6 V
* CMOS low power consumption
* Direct interface with TTL levels
* Complies with JEDEC standard:
* JESD8-7A (1.65 V to 1.95 V)
* JESD8-5A (2.3 V to 2.7 V)
* JESD8-C/JESD36 (2.7 V to 3.6 V)
* ESD protec.
Part Number74LVC126A
DescriptionQUADRUPLE 3-STATE BUFFERS
ManufacturerDiodes Incorporated
Overview The 74LVC126A provides four independent buffers with three state outputs. Each output is independently controlled by an associated output enable pin (OE) which places the device in the high impedance .
* Supply Voltage Range from 1.65V to 5.5V
* Sinks 24mA at VCC = 3.3V
* CMOS low power consumption
* IOFF Supports Partial-Power-Down Mode Operation
* Inputs or outputs accept up to 5.5V
* Inputs can be driven by 3.3V or 5.5V allowing for voltage translation applications.
* ESD Protection Exceeds JES.
Part Number74LVC126A
DescriptionQuad Buffer
ManufacturerSG Micro
Overview The 74LVC126A that provides a quad buffer with 3-state output is designed for 1.65V to 3.6V VCC operation. Both 3.3V and 5V devices can drive inputs, enabling this device to operate as a translator in.
* Wide Supply Voltage Range: 1.65V to 3.6V
* Inputs Accept Voltages up to 5.5V
* Propagation Delay: 3.3ns (TYP) at VCC = 3.3V
* Output Ground Bounce VOLP (TYP) < 0.8V at VCC = 3.3V and TA = +25℃
* Output VOH Undershoot VOHV (TYP) > 2V at VCC = 3.3V and TA = +25℃
* 3-State Output
* Separate OE for Al.

Similar Datasheets

Part Number Manufacturer Description
74LVC126A NXP Semiconductors Quad buffer/line driver
74LVC126A-Q100 Nexperia Quad buffer/line driver
74LVC126AD Nexperia Quad buffer/line driver