·
28 Hits
• Low Power CMOS Technology –Standby Current less than 8 µA (5.5V) –Read Current (typical) less than 1 mA (5.5V) –Write Current (typical) less than 3 ...
·
26 Hits
• Low Power CMOS Technology –Standby Current less than 8 µA (5.5V) –Read Current (typical) less than 1 mA (5.5V) –Write Current (typical) less than 3 ...
·
19 Hits
16 I/O ports. Ports are divided into eight push pull I/Os and eight open-drain I/Os and transition detection. Any of the 16 I/O ports can be configure...
·
18 Hits
The IS31FL3719 is a general purpose 15×9 or 16×8 LED Matrix driver programmable via 1MHz I2C compatible interface. All LED can be turned on and off i...
·
15 Hits
• Low DC line voltage; operates down to 1.8 V (excluding polarity guard) • Voltage regulator with low voltage drop and adjustable static resistance • ...
·
14 Hits
* Low DC line voltage; operates down to 1.6V (excluding voltage
drop over external polarity guard)
* Voltage regulator with adjustable DC voltage * P...
·
14 Hits
3 Auto Breathing Modes which are noted as ABM-1, ABM-2 and ABM-3. For each Auto Breathing Mode, there are 4 timing characters which include current ri...
·
14 Hits
● Internal Ethernet MAC layer and PHY layer ● Realize bidirectional transparent transmission between serial data and network data ● Support 10/100M, f...
·
13 Hits
• Low DC line voltage; operates down to 1.6 V (excluding polarity guard) • Voltage regulator with adjustable static resistance • Provides a supply for...
·
13 Hits
an audio frequency equalizer (EQ) mode or a general LED dot matrix display mode. The general LED matrix display defaults to an 8×8 configuration, howe...
·
13 Hits
• Standard Voltage: Vdd and Vddq = 1.8V ±0.1V • Low Voltage (L): Vdd and Vddq = 1.5V ±0.075V • SSTL_18-compatible for Standard Voltage • SSTL_15-compa...
This website uses cookies or similar technologies, to enhance your browsing experience and provide personalized recommendations. By continuing to use our website, you agree to our Privacy Policy