Datasheet Details
| Part number | TPA6531 |
|---|---|
| Manufacturer | 3PEAK |
| File Size | 2.55 MB |
| Description | Low-Power Op Amps |
| Download | TPA6531 Download (PDF) |
|
|
| Part number | TPA6531 |
|---|---|
| Manufacturer | 3PEAK |
| File Size | 2.55 MB |
| Description | Low-Power Op Amps |
| Download | TPA6531 Download (PDF) |
|
|
|
• Supply Voltage: 1.75 V to 5.5 V • Offset Voltage: ±1.5 mV Maximum • GPWP: 300 kHz, Slew Rate: 0.15 V/μs • Rail-to-Rail Input and Output • 0.1-Hz to 10-Hz Voltage Noise: 1 μVPP • No Significant Output Glitch when Power on and off • Low Power: 25 μA Maximum per Channel • −40°C to 125°C Operation Temperature Range Applications The TPA653x series op-amps are CMOS single, dual, and quad RRIO op-amps with low offset, low power, and stable high-frequency response.
They incorporate 3PEAK’s proprietary and patented design techniques to achieve 300-kHz bandwidth, 0.15-V/μs slew rate, and low distortion while drawing only 25 μA of quiescent current per amplifier which is suitable for low-power applications.
The TPA653x series op-amps have 1-μVPP voltage noise at 0.1 Hz to 10 Hz, because the bipolar transistor with low 1/f noise is used as the input stage.
TPA6531/TPA6532/TPA6534 5-V, 300-kHz GBWP, Low-Power Op Amps.
| Part Number | Description |
|---|---|
| TPA6532 | Low-Power Op Amps |
| TPA6533 | Low-Power Op Amps |
| TPA6551 | Low-Noise Op Amps |
| TPA6552 | Low-Noise Op Amps |
| TPA6554 | Low-Noise Op Amps |
| TPA6581 | 10-MHz Op Amp |
| TPA6582 | 10-MHz Op Amp |
| TPA6584 | 10-MHz Op Amp |
| TPA620 | Bi-Directional Current and Power Monitor |
| TPA626 | Bi-Directional Current and Power Monitor |