APW7316 Datasheet | ANPEC

Features - Wide 4.5V to 16V Operating Input Range - Low RDS(ON) Internal Power MOSFETs - Low Quiescent Current - Fast Load Transient Response - Fixed 500k Hz Switching Frequency - Build-in soft start function - Output Adjustable from 0.6 V to 5V - Protection -Output Over-Voltage Protection -Output Under-Voltage Protection -Over-Current Protection -Input Over-Voltage Protection -Over-Temperature Protection - Available in TSOT-23-6 Package - Lead Free and Green Devices Available (Ro HS pliant) General Description APW7316 is a high efficiency synchronous buck converter with integrated 100m/70mΩ of upper/lower power MOSFET. The APW7316 design with a COT-mode control scheme, can convert wide input voltage of 4.5V to 16V to the output voltage adjustable from 0.6V to 5V to provide excellent output voltage regulation. The APW7316 is equipped with an automatic PFM/PWM mode operation. At light load, the IC operates in the PFM mode to reduce the switching losses. The APW7316 provides very high efficiency over light to heavy loads with loading-modulated switching frequencies. The APW7316 is also equipped with Power-on-reset, softstart, and whole protections (over-temperature, overvoltage, under-voltage, over-current and input overvoltage) into a single package. This device, available in TSOT-23-6 package, provides a very pact system solution external ponents and PCB area. Applications - LCD TVs - LCD Monitors - Networking Systems - Distributed Power Systems Pin Configuration Simplified Application Circuit VIN EN BST SW VOUT BST 1 GND 2 FB 3 TSOT-23-6 Top View 6 SW 5 VIN 4 EN FB GND ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright © ANPEC Electronics Corp. Rev. A.4 - May., 2017 .anpec..tw Ordering and Marking Information Assembly Material Handling Code Temperature...