datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)

HLMA-DL05 Datasheet Preview

HLMA-DL05 Datasheet

T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance/ Tinted/ Diffused/ AlInGaP/ and TS AlGaAs Red LED Lamps

No Preview Available !

HLMA-DL05 pdf
H
T-13/4 (5 mm), T-1 (3 mm), High
Performance, Tinted, Diffused,
AlInGaP, and TS AlGaAs Red
LED Lamps
Technical Data
HLMA-DX05 Series
HLMA-KX05 Series
HLMP-D1XX Series
HLMP-J100/J150 Series
Features
• High Light Output Over a
Wide Range of Currents
• Popular T-1 and T-1 3/4
Packages
• Choice of Three Colors
Amber
Reddish-Orange
Deep Red
• Wide Viewing Angles
• Long Life: Solid State
Technology
• Available on Tape and Reel
Applications
• Outdoor Message Boards
• Automotive Lighting
• Portable Equipment
• Medical Equipment
• Changeable Message Signs
Description
The HLMA-D/KXXX series tinted,
diffused, solid state lamps utilize
the newly developed aluminum
indium gallium phosphide
(AlInGaP) LED technology. This
technology has a very high
luminous efficiency, capable of
producing high light output over a
wide range of drive currents.
These LED lamps are available
with a choice of two colors, 592
nm amber and 615 nm reddish-
orange, and with two viewing
angles, 65° and 60°.
The HLMP-D/JXXX series tinted,
diffused solid state lamps utilize
the highly optimized transparent
substrate aluminum gallium
arsenide (TS AlGaAs) LED
technology. This technology has a
very high luminous efficiency,
Device Selection Guide
Package Description
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Standard Current
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Diffused, Low Current
Viewing
Angle
2θ1/2
65°
60°
40°
Amber
λd = 592 nm
HLMA-
DL05
HLMA-
KL05
25°
55°
55°
Reddish-
Orange
λd = 615 nm
HLMA-
DH05
HLMA-
KH05
Deep
Red
λd = 644 nm
HLMP-
D115
HLMP-
D120
HLMP-
J100
HLMP-
J150
Package
Outline
A
B
A
A
C
C
5964-9287E
1-49



Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)

HLMA-DL05 Datasheet Preview

HLMA-DL05 Datasheet

T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance/ Tinted/ Diffused/ AlInGaP/ and TS AlGaAs Red LED Lamps

No Preview Available !

HLMA-DL05 pdf
capable of producing high light
output over the wide range of
drive currents from 500 µA to
50 mA. The color is deep red at a
dominant wavelength of 644 nm.
TS AlGaAs is a flip-chip LED
technology, die attached to the
anode lead and wire bonded to
the cathode lead. Available view-
ing angles are 25°, 40°, and 55°.
Package Dimensions
5.08 (0.200)
4.57 (0.180)
9.19 (0.362)
8.43 (0.332)
0.89 (0.035)
0.64 (0.025)
6.35 (0.250)
5.58 (0.220)
CATHODE
25.40 MIN.
(1.00)
24.13
(0.95)
MIN.
3.18 (0.125)
2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
4.70 (0.185)
4.19 (0.165)
1.02
(0.040) NOM.
0.45 SQUARE NOMINAL
(0.018)
6.35 (0.250)
5.58 (0.220)
3.18 (0.125)
2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
4.70 (0.185)
4.19 (0.165)
1.02
(0.040) NOM.
0.45
(0.018)
SQUARE
NOMINAL
2(04..9153)MIN.
1.27( 0.050) NOM.
1.27
(0.050)
NOM.
0.45 (0.018)
SQUARE
NOMIMAL
6.10 (0.240)
5.59 (0.220)
CATHODE
2.54 (0.100) NOM.
NOTES:
A
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND ABOUT
1 mm (0.040") DOWN THE LEADS.
CATHODE
ANODE
(02..15040)NOM.
B
ANODE
CATHODE
2.54 NOM.
(0.100)
1.27
(0.050)
NOM.
C
HLMA-DL05/DH05/Kl05/KH05 AlInGaP Lamps
Absolute Maximum Ratings at TA = 25°C
Parameter
HLMA-
DL05
HLMA-
DH05
HLMA-
KL05
HLMA-
KH05
DC Forward Current[1,3,4]
50 50
50 50
Peak Forward Current[2]
200 200
200 200
Average Input Power[2]
103 103
103 103
Reverse Voltage (IR = 100 µA)
Operating Temperature Range
5
-40 to
+100
5
-40 to
+100
5
-40 to
+100
5
-40 to
+100
Storage Temperature Range
-55 to
+100
-55 to
+100
-55 to
+100
-55 to
+100
Junction Temperature
110
Soldering Temperature
[1.59 mm (0.06 in.) below seating plane]
260°C for 5 second
Notes:
1. Derate linearly as shown in Figure 4.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward current as specified in Figure 5.
3. Drive currents between 10 mA and 30 mA are recommended for best long term performance.
4. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative.
1-50
Units
mA
mA
mW
V
°C
°C
°C


Part Number HLMA-DL05
Description T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance/ Tinted/ Diffused/ AlInGaP/ and TS AlGaAs Red LED Lamps
Maker Agilent(Hewlett-Packard)
Total Page 7 Pages
PDF Download
HLMA-DL05 pdf
HLMA-DL05 Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 HLMA-DL00 T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance AlInGaP LED Lamps Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HLMA-DL00 pdf
2 HLMA-DL05 T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance/ Tinted/ Diffused/ AlInGaP/ and TS AlGaAs Red LED Lamps Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HLMA-DL05 pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy