Datasheet4U Logo Datasheet4U.com

MAX22516 - IO-Link Data Link Controller

Description

The MAX22516 IO-Link data link controller integrates a 24V C/Q transceiver, an auxiliary digital input and output, an integrated DC-DC, 5V and 3.3V linear regulators, and a full-feature IO-Link data link controller.

Features

  • extensive integrated protection to ensure robust communication in harsh industrial environments. All IO-Link interface pins (V24, C/Q, DO, DI, and GND), are reverse voltage protected, shortcircuit protected, and feature integrated ±1kV/500Ω surge protection. The MAX22516 is available in a tiny WLP package (3.53mm x 3.16mm) or 40-pin TQFN-EP package (5mm x 5mm) and operates over the -40°C to +125°C temperature range. Key.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX22513 Surge Protected Dual Driver IO-Link Device Transceiver Maxim Integrated
MAX225 +5V-Powered / Multichannel RS-232 Drivers/Receivers Maxim
MAX22500E 100Mbps Half-Duplex RS-485/RS-422 Transceivers Maxim Integrated
MAX22501E 100Mbps Half-Duplex RS-485/RS-422 Transceivers Maxim Integrated
MAX22502E 100Mbps Full-Duplex RS-485/RS-422 Transceiver Maxim Integrated

Other Datasheets by Analog Devices

Part Number Description
MAX22514 Surge Protected IO-Link Transceiver
MAX22530 4-Channel 12-bit Isolated ADC
MAX22531 4-Channel 12-bit Isolated ADC
MAX22532 4-Channel 12-bit Isolated ADC
MAX22163 6-Channel Digital Isolators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX22516 IO-Link Data Link Controller with Transceiver and Integrated DC-DC General Description The MAX22516 IO-Link data link controller integrates a 24V C/Q transceiver, an auxiliary digital input and output, an integrated DC-DC, 5V and 3.3V linear regulators, and a full-feature IO-Link data link controller. Once configured, the MAX22516 data link controller operates the IO-Link transceiver and requires no intervention from the external microcontroller during normal operation. Alternatively, the IO-Link transceiver can be controlled using the UART interface (TXEN, TX, and RX) directly, or through the serial-peripheral interface (SPI). The data link controller supports and includes, receive and transmit buffers for IO-link communication.
Published: |