AH1803 Datasheet PDF - Diodes ULTRA-SENSITIVE HALL EFFECT SWITCH Specs

AH1803 - ULTRA-SENSITIVE HALL EFFECT SWITCH

Datasheet Summary

Description

The AH1803 has two Hall effect plates and a CMOS output driver.

The device is primarily designed for battery-operated, handheld equipment (such as cellular and cordless phones, PDAs).

The total operation power is down to 24µW in the 3V supply.

Features

Micropower Operation.
Operation with North or South Pole.
2.4 to 5.5V Battery Operation.
Chopper Stabilized.
Superior Temperature Stability.
Extremely Low Switch-Point Drift.
Insensitive to Physical Stress.
Good RF Noise Immunity.
-40°C to +85°C Operating Temperature.
Low-Profile 3-Pin SC59 (Commonly Known as SOT23 in Asia) and DFN2020-6 Package.
ESD (HBM) > 4KV for DFN2020-6.
SC59 (commonly known as SOT23 in Asia) and DFN2020-6: Avail.

Datasheet Details

Part number	AH1803
Manufacturer	DIODES
File Size	483.38 KB
Description	ULTRA-SENSITIVE HALL EFFECT SWITCH
Datasheet	AH1803 Datasheet
Additional preview pages of the AH1803 datasheet.

📁 Similar Datasheet

AH180 - MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH (Diodes Incorporated)

AH182 - (AH182 / AH183) LOW POWER HALL EFFECT SWITCH (Diodes Incorporated)

AH182 - (AH182 / AH183) Low power Hall Effect Switch (ANACHIP)

AH183 - (AH182 / AH183) LOW POWER HALL EFFECT SWITCH (Diodes Incorporated)

AH183 - (AH182 / AH183) Low power Hall Effect Switch (ANACHIP)

AH1883 - ULTRA-SENSITIVE HALL EFFECT SWITCH (Diodes Incorporated)

AH1884 - ULTRA-SENSITIVE HALL EFFECT SWITCH (Diodes Incorporated)

AH1885 - ULTRA-SENSITIVE HALL EFFECT SWITCH (Diodes Incorporated)

AH1886 - ULTRA-SENSITIVE HALL EFFECT SWITCH (Diodes Incorporated)

AH1887 - ULTRA-SENSITIVE HALL-EFFECT SWITCH (Diodes Incorporated)

Full PDF Text Transcription

Click to expand full text

NOT RECOMMENDED FOR NEW DESIGN USE AH1806 Green AH1803 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH Description The AH1803 has two Hall effect plates and a CMOS output driver. The device is primarily designed for battery-operated, handheld equipment (such as cellular and cordless phones, PDAs). The total operation power is down to 24µW in the 3V supply. Either the north or south pole turns the output on with sufficient strength. The output turns off under no magnetic field. While the magnetic flux density (B) is larger than operate point (Bop), the output turns on (low). The output is held until B is lower than release point (Brp) then turns off (high). Features  Micropower Operation  Operation with North or South Pole  2.4 to 5.

Published: Jul 30, 2015 |