FOUR-CHANNEL CURRENT SOURCE BOOST LED DRIVER
The AL3065 is a high efficiency 4-channel boost controller for WLED
backlight applications. It operates over a wide input voltage ranged
from 4.5V to 33V.
The current of the 4 channels is simply programmed from 20mA to
400mA with an external resistor. The current match between any
channel is ±1.5% (typical). Its operating frequency can be adjusted
from 0.1MHz to 1MHz.
The AL3065 can support three dimming modes: direct PWM dimming,
PWM to analog dimming and DC to analog dimming.
Robust protection features include cycle by cycle current limit, soft-
start, UVLO, programmable OVP, OTP, open/short LED protection,
Schottky Diode Short and Open Protection, Inductor Short-Circuit
Protection and VOUT Short protection.
The IC is available in SO-16 package.
Input Voltage Range: 4.5V to 33V
Drivers up to 4 Strings in Parallel, 250mA per String, 400mA
±3% Current Precision
Low Ripple for Low BOM Cost
4KV HBM ESD Class
High Voltage Pins CS and OVP for Safety Test
Supports Direct PWM Dimming, PWM to Analog Dimming and
DC to Analog Dimming Control
Minimum PWM Dimming Duty Cycle can be 1/10,000 at 100Hz
LED Open/Short Protection
Schottky Diode/Inductor Short-Circuit Protection
Built-in OCP, OVP, OTP, UVLO, VOUT Short/Schottky Diode
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
LCD Display Module
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Typical Applications Circuit
VCC / DC signal / NC
3.3V/ ON OFF
Document number: DS37677 Rev. 3 - 2
1 of 14
© Diodes Incorporated