Datasheet4U Logo Datasheet4U.com

AN2635 - On-Chip FLASH Programming Routines

Description

RAM In general, RAM in Table 1 indicates the RAM start address.

See Table 2 for RAM start locations for specific MCUs.

For example, the RAM start address for the MC68HC908LB8 (and each MCU currently in the table) is $80.

Features

  • is set Serviced DELNUS.
  • Not Serviced.
  • RAM Variable.
  • LADD.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN2633 LIN Drivers Application Note Motorola
AN2633 STR91xFA low power management and power consumption Application note STMicroelectronics
AN26 CMOS Gate Array AMI
AN26011A LNA-IC Panasonic Semiconductor
AN26018A LNA IC Panasonic Semiconductor

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
AN2104 Using Background Debug Mode
AN2207 Using the MPMC8245 Card in Standalone Mode
AN2407 Reed Solomon Encoder/Decoder on the StarCore SC140/SC1400 Cores
AN2540 Synchronizing Instructions
AN2701 PWM Generation

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Freescale Semiconductor Application Note AN2635 Rev. 4, 10/2005 On-Chip FLASH Programming Routines For MC68HC908LB8, MC68HC908QL4, MC68HC908QB8, MC68HC908QB4, MC68HC908QY8, and MC68HC908QY4A Series1 By: Kazue Kikuchi MCU Applications Engineering Austin, Texas Introduction This application note applies to the MC68HC908LB8, MC68HC908QL4, MC68HC908QB4/QB8/QY8, and MC68HC908QY4A Series1 FLASH-based microcontroller units (MCUs). To program, erase, and verify FLASH, these MCUs have on-chip FLASH support routines residing in ROM (read-only memory). These routines may be accessed in either user mode or monitor mode and eliminate the need to develop separate FLASH routines for applications.
Published: |