Datasheet4U Logo Datasheet4U.com

MS7905 - PRESSURE SENSOR DIE

Description

The sensor element of the MS7905 consists of a silicon micro-machined membrane.

Implanted resistors make use of the piezo-resistive effect to sense the membrane deflection and transform it in an electrical signal.

Features

  • Uncompensated pressure sensor die.
  • Output span 150mV @ 5V.
  • Temperature range -40°…+125°C.
  • Linearity 0.05% (typical).
  • Very small die size 1.72 x 1.58 mm (MS7905-A).
  • Low cost, high reliability.

📥 Download Datasheet

Datasheet preview – MS7905

Datasheet Details

Part number MS7905
Manufacturer Intersema
File Size 215.42 KB
Description PRESSURE SENSOR DIE
Datasheet download datasheet MS7905 Datasheet
Additional preview pages of the MS7905 datasheet.

📁 Similar Datasheet

  • MS7 - MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS (RUBYCON CORPORATION)
  • MS7200 - HD to Digital RGB/YUV (MACRO SILICON)
  • MS721 - Meter bus (M-Bus) slave transceiver circuit (Ruimeng)
  • MS7212 - PRESSURE SENSOR DIE (Measurement)
  • MS7212-A2 - Hermetic Pressure Sensor Die (Measurement)
  • MS7332M - Integrated Single Video Amplifier And Video Coaxial Control Decoder (Ruimeng)
  • MS7335M - Integrated single-channel video op-amp (Ruimeng)
  • MS7336M - HD/FHD Selectable Video Filter Driver (Ruimeng)
  • MS7336MA - HD/FHD Selectable Video Filter Driver (Ruimeng)
  • MS7337M - Integrated single-channel video op-amp (Ruimeng)
Other Datasheets by Intersema

Full PDF Text Transcription

Click to expand full text
MS7905 PRESSURE SENSOR DIE (0-5 BAR) • 0 to 500 kPa range (5 bar or 73 PSI) • Absolute/differential pressure sensors • High linearity, small size • High overpressure capability (18 bar) • RoHS-compatible & Pb-free1 DESCRIPTION The sensor element of the MS7905 consists of a silicon micro-machined membrane. Implanted resistors make use of the piezo-resistive effect to sense the membrane deflection and transform it in an electrical signal. This sensor, which has outstanding linearity and span values, is available in various configurations. The absolute pressure sensor employs a sealed vacuum reference cavity underneath the membrane. The Pyrex glass wafer used for this sealing has a thickness of 0.2 mm (MS7905-A_0.2) or 0.5 mm (MS7905-A_0.5).
Published: |