HCS139MS Datasheet | Intersil

Features - 3 Micron Radiation Hardened SOS CMOS - Total Dose 200K RAD (Si) - SEP Effective LET No Upsets: >100 MEV-cm2/mg - Single Event Upset (SEU) Immunity < 2 x 10-9 Errors/ Bit-Day (Typ) - Dose Rate Survivability: >1 x 1012 RAD (Si)/s - Dose Rate Upset >1010 RAD (Si)/s, 20ns Pulse - Latch-Up Free Under Any Conditions - Military Temperature Range: -55o C to +125o C - Significant Power Reduction pared to LSTTL ICs - DC Operating Voltage Range: 4.5V to 5.5V - Input Logic Levels - VIL = 30% of VCC Max - VIH = 70% of VCC Min - Input Current Levels Ii  5A at VOL, VOH Description The Intersil HCS139MS is a Radiation Hardened 2-to-4 line Decoder/Demultiplexer with an active low enable (E). Data on the select inputs (A0, A1) cause one of the four normally high outputs to go to a low logic level. The Demultiplexing function is performed by using the enable input as the data input. If the enable input is high all four outputs remain high. For demultiplexer operation the enable input is the data input. The enable input also functions as a chip select when these devices are cascaded. The HCS139MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of radiation hardened, high-speed, CMOS/SOS Logic Family. The HCS139MS is supplied in a 16 lead Ceramic flatpack (K suffix) or a SBDIP Package (D suffix). Pinouts 16 LEAD CERAMIC DUAL-IN-LINE METAL SEAL PACKAGE (SBDIP) MIL-STD-1835 CDIP2-T16, LEAD FINISH C TOP VIEW E1 1 1 A0 1 2 A1 1 3 Y0 1 4 Y1 1 5 Y2 1 6 Y3 1 7 GND 8 16 VCC 15 2 E 14 2 A0 13 2 A1 12 2 Y0 11 2 Y1 10 2 Y2 9 2 Y3 16 LEAD CERAMIC METAL SEAL FLATPACK PACKAGE (FLATPACK) MIL-STD-1835 CDFP4-F16, LEAD FINISH C TOP VIEW E1 A0 1 A1 1 Y0 1 Y1 1 Y2 1 Y3 1...