KK4052B - Analog Multiplexer Demultiplexer High-Performance Silicon-Gate CMOS

KODENSHI KOREA

Datasheet Details

Part number	KK4052B
Manufacturer	KODENSHI KOREA
File Size	306.19 KB
Description	Analog Multiplexer Demultiplexer High-Performance Silicon-Gate CMOS
Datasheet	KK4052B Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
KK40F120	THYRISTOR MODULE	SanRex Corporation
KK40F160	THYRISTOR MODULE	SanRex Corporation
KK40F40	THYRISTOR MODULE	SanRex Corporation
KK40F80	THYRISTOR MODULE	SanRex Corporation
KK414	HIGH POWER THYRISTOR	PST

Other Datasheets by KODENSHI KOREA

Part Number	Description
KK4050B	Hex Buffer/Converter High-Voltage Silicon-Gate CMOS
KK4051B	Analog Multiplexer Demultiplexer High-Performance Silicon-Gate CMOS
KK4053B	Analog Multiplexer Demultiplexer High-Performance Silicon-Gate CMOS
KK4001B	Quad 2-Input NOR Gate High-Voltage Silicon-Gate CMOS
KK4002B	Dual 4-Input NOR Gate High-Voltage Silicon-Gate CMOS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

www.DataSheet4U.com TECHNICAL DATA KK4052B Analog Multiplexer Demultiplexer High-Performance Silicon-Gate CMOS The KK4052B analog multiplexer/demultiplexer is digitally controlled analog switches having low ON impedance and very low OFF leakage current. Control of analog signals up to 20V peak-to-peak can be achieved by digital signal amplitudes of 4.5 to 20V (if VCC - GND = 3V, a VCC - VEE of up to 13 V can be controlled; for VCC - VEE level differences above 13V a VCC - GND of at least 4.5V is required). These multiplexer circuits dissipate extremely low quiescent power over the full VCC -GND and VCC - VEE supply-voltage ranges, independent of the logic state of the control signals. When a logic “1”is present at the ENABLE input terminal all channels are off.