MX25U6435E Datasheet | Macronix

FEATURES GENERAL - Serial Peripheral Interface patible -- Mode 0 and Mode 3 - 64Mb: 67,108,864 x 1 bit structure or 33,554,432 x 2 bits (two I/O mode) structure or 16,777,216 x 4 bits (four I/O mode) structure - Equal Sectors with 4K byte each, or Equal Blocks with 32K byte each or Equal Blocks with 64K byte each - Any Block can be erased individually - Single Power Supply Operation - 1.65 to 2.0 volt for read, erase, and program operations - Latch-up protected to 100m A from -1V to Vcc +1V - Low Vcc write inhibit is from 1.0V to 1.4V PERFORMANCE - High Performance - Fast read for SPI mode - 1 I/O: 104MHz with 8 dummy cycles - 2 I/O: 84MHz with 4 dummy cycles, equivalent to 168MHz - 4 I/O: 104MHz with 2+4 dummy cycles, equivalent to 416MHz - Fast read for QPI mode - 4 I/O: 84MHz with 2+2 dummy cycles, equivalent to 336MHz - 4 I/O: 104MHz with 2+4 dummy cycles, equivalent to 416MHz - Fast program time: 1.2ms(typ.) and 3ms(max.)/page (256-byte per page) - Byte program time: 10us (typical) - 8/16/32/64 byte Wrap-Around Burst Read Mode - Fast erase time: 45ms (typ.)/sector (4K-byte per sector); 250ms(typ.)/block (32K-byte per block), 500ms(typ.) / block (64K-byte per block); 36s(typ.) /chip - Low Power Consumption - Low active read current: 20m A(typ.) at 104MHz, 15m A(typ.) at 84MHz - Low active erase/programming current: 20m A (typ.) - Standby current: 25u A (typ.) - Deep Power Down: 2u A(typ.) - Typical 100,000 erase/program cycles - 20 years data retention SOFTWARE FEATURES - Input Data Format - 1-byte mand code - Advanced Security Features - Block lock protection The BP0-BP3 status bit defines the size of the area to be software protection against program and erase instructions - Additional 4k-bit secured OTP for unique identifier - Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector or block P/N:...