MPQ6614-AEC1 Datasheet H-Bridge DC Motor Driver

Manufacturer: Monolithic Power Systems

Datasheet Details

The MPQ6614-AEC1 is an H-bridge motor driver used for driving reversible motors.

It can drive one DC motor, one winding of a stepper motor, or other loads.

The H-bridge consists of four N-channel power MOSFETs, and an internal charge pump generates the gate driver voltages.

DESCRIPTION The MPQ6614-AEC1 is an H-bridge motor driver used for driving reversible motors.

It can drive one DC motor, one winding of a stepper motor, or other loads.

do not require the use of a low-ohmic shunt resistor. The MPQ6614-AEC1 has a pulse-width modulation (PWM) input interface, which is compatible with industry-standard devices. A brake is applied when stopping the motor. When disabled, the MPQ6614-AEC1 can achieve a low standby circuit current. Internal shutdown functions include overcurrent protection (OCP), short-circuit protection (SCP), under-voltage lockout (UVLO), and thermal shutdown. The MPQ6614-AEC1 requires a minimal number of readily av.

Part Number	Description
MPQ6614GDE-AEC1	H-Bridge DC Motor Driver
MPQ6610	Half-Bridge Power Driver
MPQ6612A	H-Bridge DC Motor Driver
MPQ6612A-D	H-Bridge DC Motor Driver
MPQ6626	Hex Half-Bridge Motor Driver
MPQ6628	Octal Half-Bridge Motor Driver
MPQ6628GF-AEC1	Octal Half-Bridge Motor Driver
MPQ6631H	3-Phase BLDC Motor Driver
MPQ6631HGLTE	3-Phase BLDC Motor Driver
MPQ6653-AEC1	Single-Phase BLDC Motor Driver