Datasheet4U Logo Datasheet4U.com

MAX5186 - Dual / 8-Bit / 40MHz / Current/Voltage / Simultaneous-Output DACs

Description

The MAX5186 contains two 8-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation.

Features

  • o +2.7V to +3.3V Single-Supply Operation o Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz o Fully Differential Outputs for Each DAC o ±0.5% FSR Gain Mismatch o ±0.15° Phase Mismatch o Low-Current Standby or Full Shutdown Modes o Internal +1.2V, Low-Noise Bandgap Reference o Small 28-Pin QSOP Package MAX5186/MAX5189 Ordering Information PART MAX5186BEEI MAX5189BEEI TEMP. RANGE -40°C to +85°C -40°C to +85°C PIN-.

📥 Download Datasheet

Datasheet preview – MAX5186

📁 Similar Datasheet

  • MAX5183 - Current/Voltage Simultaneous-Output DACs (Maxim Integrated)
  • MAX5185 - 40MHz Current/Voltage Alternate-Phase Output DACs (Maxim Integrated)
  • MAX5189 - Dual / 8-Bit / 40MHz / Current/Voltage / Simultaneous-Output DACs (Maxim Integrated)
  • MAX5109 - 8-Bit DACs (Maxim Integrated Products)
  • MAX5113 - 14-Bit Current DAC (Maxim Integrated)
  • MAX5121 - Serial Voltage-Output DACs (Maxim Integrated)
  • MAX5123 - Force/Sense DACs (Maxim Integrated)
  • MAX5128 - Linear-Taper Digital Potentiometer (Maxim Integrated Products)
  • MAX5131 - Voltage-output DACs (Maxim Integrated Products)
  • MAX5133 - Force/sense DACs (Maxim Integrated Products)
Other Datasheets by Maxim
  • MAX518 - 2-Wire Serial 8-Bit DACs
  • MAX5180 - Current/Voltage Simultaneous-Output DACs
  • MAX5181 - 10-Bit / 40MHz / Current/Voltage-Output DACs
  • MAX5182 - 40MHz Current/Voltage Alternate-Phase Output DACs
  • MAX5184 - 10-Bit / 40MHz / Current/Voltage-Output DACs
  • MAX5187 - 8-Bit / 40MHz / Current / Voltage-Output DACs
  • MAX5188 - Alternate-Phase Output DACs
  • MAX510 - Quad / Serial 8-Bit DACs

Full PDF Text Transcription

Click to expand full text
19-1581; Rev 0; 12/99 Dual, 8-Bit, 40MHz, Current/Voltage, Simultaneous-Output DACs General Description The MAX5186 contains two 8-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5189 provides equal specifications, with on-chip precision resistors for voltage output operation. The MAX5186/ MAX5189 are designed for a 10pVs glitch operation to minimize unwanted spurious signal components at the output. An on-board +1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation.
Published: |