Datasheet4U Logo Datasheet4U.com

DS26102 - 16-Port TDM-to-ATM PHY

Description

On the transmit side, the DS26102 receives ATM cells from an ATM device through a UTOPIA II interface, provides cell buffering (up to 4 cells), HEC generation and insertion, cell scrambling, and converts the data to a serial stream appropriate for interfacing to a T1/E1 framer or transceiver.

Features

  • Supports 16 T1/E1 TDM Ports Supports Fractional T1/E1 Compliant to ATM Forum Specifications for ATM Over T1 and E1 Standard UTOPIA II Interface to the ATM Layer Configurable UTOPIA Address Range Configurable Tx FIFO Depth to 2, 3, or 4 Cells Optional Payload Scrambling in Transmit Direction and Descrambling in Receive Direction per ITU I.432 Optional HEC Insertion in Transmit Direction wit.

📥 Download Datasheet

📁 Similar Datasheet

  • DS2604 - NPN TRIPLE DIFFUSED TYPE (HIGH POWER SWITCHING/ HAMMER DRIVE/ PULSE MOTOR DRIVE APPLICATIONS) (Toshiba Semiconductor)
  • DS26324 - E1/T1/J1 Short-Haul Line Interface Unit (Dallas Semiconductor)
  • DS26334 - E1/T1/J1 Shortand Long-Haul Line Interface Unit (Dallas Semiconductor)
  • DS26401 - Octal T1/E1/J1 Framer (Dallas Semiconducotr)
  • DS26503 - T1/E1/J1 BITS Element (Dallas Semiconducotr)
  • DS2660-7R - 100 Watt DC-DC Converters (Power-One)
  • DS26C31M - CMOS Quad TRI-STATE Differential Line Driver (National Semiconductor)
  • DS26C31MQML - DS26C31MQML CMOS Quad TRI-STATE Differential Line Driver (Rev. A) (ETCTI)
  • DS26C31T - CMOS Quad TRI-STATE Differential Line Driver (National Semiconductor)
  • DS26C32AM - Quad Differential Line Receiver (National Semiconductor)
Other Datasheets by Maxim Integrated Products
  • DS26101 - 8-Port TDM-to-ATM PHY
  • DS26303 - Octal Line Interface Unit
  • DS26502 - T1/E1/J1/64KCC BITS Element
  • DS26504 - T1/E1/J1/64KCC BITS Element
  • DS26518 - single-chip 8-port framer and line interface unit (LIU) combination
  • DS26519 - single-chip 16-port framer and line interface unit (LIU) combination
  • DS26522 - Dual T1/E1/J1 Transceiver
  • DS26524 - Quad T1/E1/J1 Transceiver

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com DS26102 16-Port TDM-to-ATM PHY www.maxim-ic.com GENERAL DESCRIPTION On the transmit side, the DS26102 receives ATM cells from an ATM device through a UTOPIA II interface, provides cell buffering (up to 4 cells), HEC generation and insertion, cell scrambling, and converts the data to a serial stream appropriate for interfacing to a T1/E1 framer or transceiver. On the receive side, the DS26102 receives a TDM stream from a T1/E1 framer or transceiver; searches for the cell alignment; verifies the HEC; provides cell filtering, descrambling, and cell buffering; and passes the cells to an ATM device through the UTOPIA II interface. Other low-level traffic management functions are selectable for the transmit and receive paths.
Published: |