Datasheet Details
| Part number | TDA8592J |
|---|---|
| Manufacturer | NXP Semiconductors |
| File Size | 542.89 KB |
| Description | (TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier |
| Datasheet |
 TDA8592J Datasheet
|
|
|
Description
The TDA8592J; TDA8592Q is a complementary quad BTL audio power amplifier made in the BCDMOS technology.
It contains four independent amplifiers in Bridge Tied Load (BTL) configuration.
Through the I2C-bus the diagnostic information of each amplifier and speaker can be read separately.
Features
- s I2C-bus control s Hardware programmable I2C-bus address s Can drive a 2 Ω load with a battery voltage of up to 16 V and a 4 Ω load with a battery voltage of up to 18 V s DC-load detection: open, short and present s AC-load (tweeter) detection s Programmable clip detection: 1 % or 3 % s Programmable thermal protection pre-warning s Independent short-circuit protection per channel s Low gain line driver mode (20 dB) s Loss-of-ground and open VP safe s All outputs protected from short-circuit to.