Datasheet4U Logo Datasheet4U.com

TDA8594 Datasheet 4 X 50w Power Amplifier

Manufacturer: NXP Semiconductors

Overview: TDA8594 I2C-bus controlled 4  50 W power amplifier Rev. 5 — 11 June 2013 Product data sheet 1.

General Description

The TDA8594 is a plementary quad Bridge Tied Load (BTL) audio power amplifier made in BCDMOS technology.

It contains four independent amplifiers in BTL configuration.

Through the I2C-bus, diagnosis of temperature warning and clipping level is fully programmable and the information available via two diagnostic pins is selectable.

Key Features

  • 2.1 General.
  • Operates in legacy mode (non I2C-bus) and I2C-bus mode (3.3 V and 5 V compliant).
  • Three hardware-programmable I2C-bus addresses.
  • Drives 4  or 2  loads.
  • Speaker fault detection.
  • Independent short-circuit protection per channel.
  • Loss of ground and open VP safe (with 200 m series impedance and a supply decoupling capacitor of 2200 F maximum).
  • All outputs short-circuit proof to ground, supply voltage and across the load.
  • All pins short-circuit.

More Datasheets from NXP Semiconductors

Part Number Description
TDA8591J 4 X 44 W into 4 or 4 X 75 W into 2 quad BTL car radio power amplifier
TDA8592J (TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier
TDA8592Q (TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier
TDA8596 4 x 45 W power amplifier
TDA8501 PAL/NTSC encoder
TDA8505 SECAM encoder
TDA8510J 26 W BTL and 2 x 13 W SE power amplifiers
TDA8511J 4 x 13 W single-ended power amplifiers
TDA8512J 26 W BTL and 2 x 13 W SE or 4 x 13 W SE power amplifier
TDA8540 4 X 4 video switch matrix

TDA8594 Distributor