Datasheet4U Logo Datasheet4U.com

MN54ABT646-x - REV 0B0

Description

The ABT646 consists of bus tranceiver circuits wit TRI-STATE, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers.

Features

  • Page Processing MIL-STD-883, Method 5004 Subgrp.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MN50000 CMOS Gate Arrays Panasonic
MN50003 CMOS Gate Arrays Panasonic
MN50005 CMOS Gate Arrays Panasonic
MN50007 CMOS Gate Arrays Panasonic
MN50010 CMOS Gate Arrays Panasonic

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
MN54ABT240-x OCTAL BUFFER AND LINE DRIVER
MN54ABT244-x REV 0B0
MN54AC14-X Hex Inverter Schmidt Trigger
MN54AC244-X Octal Buffers/Line Drivers
MN54AC251-X 8-Input Multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MICROCIRCUIT DATA SHEET MN54ABT646-X REV 0B0 Original Creation Date: 08/25/95 Last Update Date: 10/05/98 Last Major Revision Date: 03/19/97 OCTAL TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS General Description The ABT646 consists of bus tranceiver circuits wit TRI-STATE, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers. Data on the A or B bus will be clocked into the registers as the appropriate clock pin goes to a high logic level. Control OE and direction pins are provided to control the transceiver function. In the transceiver mode, data present at the high impedance port may be stored in either the A or the B register or in both.
Published: |