Datasheet4U Logo Datasheet4U.com

NJU6062 - Full Color LED Controller Driver

Description

The NJU6062 is a full color LED controller driver.

It can control and drive a 3 in 1 packaged (Red, Green and Blue) LED.

The NJU6062 contains PWM luminance (Pulse Width Modulation) control circuit , LED driving circuit, MPU interface.

Features

  • Controlling a 3-in-1 packaged RGB LED 4-channel output ILED=30mA x 4 Built-in PWM luminance control Built-in I2C interface circuit Multi Device control Built-in CR oscillation circui.

📥 Download Datasheet

Datasheet preview – NJU6062

Datasheet Details

Part number NJU6062
Manufacturer New Japan Radio
File Size 230.86 KB
Description Full Color LED Controller Driver
Datasheet download datasheet NJU6062 Datasheet
Additional preview pages of the NJU6062 datasheet.

📁 Similar Datasheet

  • NJU6060 - Full Color LED Controller Driver (JRC)
  • NJU6061 - Full Color LED Controller Driver (JRC)
  • NJU6043 - PWM WHITE LED DRIVER (JRC)
  • NJU6048 - High Efficiency White LED Driver (JRC)
  • NJU6049 - High Efficiency White LED Driver (JRC)
  • NJU6050 - High Efficiency White LED Driver (JRC)
  • NJU6051 - White LED Driver (JRC)
  • NJU6052 - White LED Driver (JRC)
  • NJU6053 - White LED Driver (JRC)
  • NJU6214 - Small-Sized 1.8V Operating Voltage Fundamental Quartz Crystal Oscillator IC (NJR)
Other Datasheets by New Japan Radio
  • NJU6063 - RGB LED Controller Driver
  • NJU6010 - 24 keys input key-scan IC
  • NJU6014 - REMOTE CONTROL COMMANDER IC
  • NJU6080 - CONSTANT CURRENT LED DRIVER
  • NJU6212 - 1.8V Operating Voltage Fundamental Quartz Crystal Oscillator IC
  • NJU6214 - Small-Sized 1.8V Operating Voltage Fundamental Quartz Crystal Oscillator IC
  • NJU6215 - Low Operating Current Fundamental Quartz Crystal Oscillator IC
  • NJU6215 - Low Operating Current Fundamental Quartz Crystal Oscillator IC

Full PDF Text Transcription

Click to expand full text
NJU6062 Full Color LED Controller Driver with PWM Control GENERAL DESCRIPTION The NJU6062 is a full color LED controller driver. It can control and drive a 3 in 1 packaged (Red, Green and Blue) LED. The NJU6062 contains PWM luminance (Pulse Width Modulation) control circuit , LED driving circuit, MPU interface. The PWM signal control the duty cycle of each RGB LED delicately, therefore can recognize a lot of colors. Enable terminal (ON/OFF) is possible to synchronize with a sound source.. It requires only four external components such as three resistors for LED current adjustment, which enables the NJU6062 to save PCB space. Multi Device control is enabled and it is possible to control the multiple NJU6062 by a I2C address. The NJU6062 is suitable for cellular phone, car audio and so on.
Published: |