Datasheet4U Logo Datasheet4U.com

CM2006 - LCD and Camera EMI Filter

Description

The CM2006 connects between the VGA or DVI

and the internal analog or digital flat panel controller logic.

The CM2006 incorporates ESD protection for all signals, level shifting for the DDC signals and buffering for the SYNC signals.

Features

  • Includes ESD Protection, Level.
  • Shifting, Buffering and Sync Impedance Matching †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D.
  • VESA VSIS Version 1 Revision 2 Compatible Interface.
  • Supports Optional NAVI Signalling Requirements.
  • 7 Channels of ESD Protection for all VGA Port.
  • Bidirectional Level Shifting N.
  • Ch.

📥 Download Datasheet

Datasheet Details

Part number CM2006
Manufacturer onsemi
File Size 88.23 KB
Description LCD and Camera EMI Filter
Datasheet download datasheet CM2006 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CM2006 VGA Port Companion Circuit CMD
CM200201SFAYB-01 LCD Module Data Image
CM2004 8 MASK single chip SHANGHAI BELLING
CM2009 VGA Port Companion Circuit CMD
CM200C (CM200C / CM250C) TUNING FORK CRYSTAL UNITS Citizen

Other Datasheets by onsemi

Part Number Description
CM2009 VGA Port Companion Circuit
CM2020-00TR HDMI Transmitter Port Protection and Interface Device
CM2021-02TR HDMI Receiver Port Protection/Interface
CM2030 HDMI Receiver Port Protection and Interface Device
CM2031 HDMI Receiver Port Protection and Interface Device

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CM2006 Praetorian) L-C LCD and Camera EMI Filter Array with ESD Protection Product Description The CM2006 connects between the VGA or DVI−I port connector and the internal analog or digital flat panel controller logic. The CM2006 incorporates ESD protection for all signals, level shifting for the DDC signals and buffering for the SYNC signals. ESD protection for the video, DDC and SYNC lines is implemented with low−capacitance current steering diodes. All connector interface pins are designed to safely handle the high current spikes specified by IEC−61000−4−2 Level 4 (±8 kV contact discharge). The ESD protection for the DDC, SYNC and VIDEO signal pins is designed to prevent “backdrive current” when the device is powered down while connected to a video source that is powered up.
Published: |