Datasheet4U Logo Datasheet4U.com

FAN7930C - PFC Controller

General Description

controller for boost PFC applications that operate in critical conduction mode (CRM).

mode PWM that compares an internal ramp signal with the error amplifier output to generate a MOSFET turn

off signal.

Key Features

  • PFC.
  • Ready Signal.
  • VIN.
  • Absent Detection.
  • Maximum Switching Frequency Limitation.
  • Internal Soft.
  • Start and Startup without Overshoot.
  • Internal Total Harmonic Distortion (THD) Optimizer.
  • Precise Adjustable Output Over.
  • Voltage Protection.
  • Open.
  • Feedback Protection and Disable Function.
  • Zero.
  • Current Detector (ZCD).
  • 150 ms Internal Startup Timer.
  • MOSFET Over.

📥 Download Datasheet

Datasheet Details

Part number FAN7930C
Manufacturer onsemi
File Size 618.74 KB
Description PFC Controller
Datasheet download datasheet FAN7930C Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FAN7930C Critical Conduction Mode PFC Controller Fairchild Semiconductor
FAN7930 Critical Conduction Mode PFC Controller Fairchild Semiconductor
FAN7930B Critical Conduction Mode PFC Controller Fairchild Semiconductor
FAN7000D Low Power Amplifier Fairchild Semiconductor
FAN7005 200mW Stereo Power Amplifier Fairchild Semiconductor

Other Datasheets by onsemi

Part Number Description
FAN7930B PFC Controller
FAN7080-GF085 Half Bridge Gate Driver
FAN7083-GF085 High Side Gate Driver
FAN7085-GF085 High Side Gate Driver
FAN7171-F085 High-Side Automotive Gate Driver IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com Critical Conduction Mode PFC Controller FAN7930C SOIC8 CASE 751EB Description The FAN7930C is an active power factor correction (PFC) controller for boost PFC applications that operate in critical conduction mode (CRM). It uses a voltage−mode PWM that compares an internal ramp signal with the error amplifier output to generate a MOSFET turn−off signal. Because the voltage−mode CRM PFC controller does not need rectified AC line voltage information, it saves the power loss of an input voltage−sensing network necessary for a current−mode CRM PFC controller. FAN7930C provides over−voltage protection (OVP), open−feedback protection, over−current protection (OCP), input−voltage−absent detection, and under−voltage lockout protection (UVLO).