Datasheet4U Logo Datasheet4U.com

MAX708 - (MAX707 / MAX708) UP Supervisory Circuits

Download the MAX708 datasheet PDF. This datasheet also covers the MAX707 variant, as both devices belong to the same (max707 / max708) up supervisory circuits family and are provided as variant models within a single manufacturer datasheet.

Description

Manual Reset Input.

MR can be driven from TTL/CMOS logic or from a manual Reset switch.

This input, when floating, is internally pulled up to VCC with 50 kW resistor.

Features

  • http://onsemi. com.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX707_ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number MAX708
Manufacturer onsemi
File Size 121.62 KB
Description (MAX707 / MAX708) UP Supervisory Circuits
Datasheet download datasheet MAX708 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX708 Low-Cost / uP Supervisory Circuits Maxim
MAX708 uP Supervisory Circuit ART CHIP
MAX708R Low-Cost uP Supervisory Circuits Maxim Integrated
MAX708S Low-Cost uP Supervisory Circuits Maxim Integrated
MAX708T Low-Cost uP Supervisory Circuits Maxim Integrated

Other Datasheets by onsemi

Part Number Description
MAX707 (MAX707 / MAX708) UP Supervisory Circuits
MAX1617 SMBus Temperature Sensor with Internal and External Diode Input
MAX1720 Switched Capacitor Voltage Inverter
MAX6501 Ultra Small Temperature Switch
MAX6502 Ultra Small Temperature Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MAX707, MAX708 mP Supervisory Circuits The MAX707/708 are cost−effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 20 msec of VCC falling through the reset voltage threshold. Reset is maintained with 200 mS of delay time after VCC rise above the reset threshold. The MAX707/708 have a low quiescent current of 12 mA at VCC = 3.3 V, an active−high RESET and active−low RESET with a push−pull output. The output is guaranteed valid down to VCC = 1.0 V. The MAX707/708 have a Manual Reset MR input and a +1.25 V threshold detector for power−fail input PFI.
Published: |