NCP51198 - 1.5A DDR Memory Termination Regulator

ON Semiconductor

📥 Download Datasheet

NCP51198 Datasheet Preview — Preview of NCP51198 PDF

Datasheet Details

Part number	NCP51198
Manufacturer	ON Semiconductor
File Size	217.03 KB
Description	1.5A DDR Memory Termination Regulator
Datasheet	NCP51198_ONSemiconductor.pdf

NCP51198 Product details

Description

NCP51198 Pin Number SO8 EP Pin Name Pin Function 1 GND Common Ground.2 /SS Suspend Shutdown supports Suspend To RAM function.CMOS compatible input sets VTT output to high impedance state.Logic HI = Enable, Logic LO = Shutdown.3 VTTS VTTS is the VTT sense input.4 VREF VREF is an output pin that provides the buffered output of the internal reference voltage equal to half of VDDQ.Two resistors dividing down the VDDQ voltage on the pin to create the regulated

Features

include extremely low initial offset voltage, excellent load regulation, source/sink soft.
start and on.
chip thermal shut.
down protection. The NCP/NCV51198 features the power.
saving Suspend To Ram (STR) function which will tri.
state the regulator output and lower the quiescent current drawn when the /SS pin is pulled low. The NCP/NCV51198 is available in a SOIC.
8 Exposed Pad package. Features.
Generate DDR Memory Termination Voltage (VTT).

📁 NCP51198 Similar Datasheet

NCP511 - Low-Dropout Voltage Regulator (ON)
NCP51752 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
NCP500 - 150mA CMOS Low Noise Low-Dropout Voltage Regulator (ON)
NCP5007 - Compact Backlight LED Boost Driver (ON)
NCP5203 - 2-in-1 DDR Power Controller (ON)
NCP551 - Low-Dropout Voltage Regulator (ON)
NCP561 - 150mA CMOS Low Iq Low-Dropout Voltage Regulator (ON)
NCP565 - Linear Regulator (ON)

Other Datasheets by ON Semiconductor

NCP51190 - 1.5A DDR Memory Termination Regulator
NCP51199 - Termination Regulator
NCP51100 - Low-Side Gate Driver
NCP51105 - Low-Side Gate Driver
NCP51145 - Termination Regulator
NCP5104 - Half Bridge Driver

Published: Nov 3, 2013 |