Datasheet4U Logo Datasheet4U.com

NCS5651 - 2 Amp PLC Line Driver

Description

line driver.

It is optimized to accept a signal from a Power Line Carrier modem.

The device consists of two Operational Amplifiers (opamps).

Features

  • Rail.
  • to.
  • Rail: Drop of Only ±1 V with IOUT = 1.5 A.
  • VBB Supply Voltage: 6.
  • 12 V.
  • Flexible 4th.
  • Order Filtering.
  • Current.
  • Limit Set with One Resistor.
  • Diagnostic Flags Level Shifted to VCC to Simplify Interface with External MCU.
  • Thermal Warning Flag with Flexible Threshold Setting.
  • Thermal Error flag and Shutdown.
  • Overcurrent Flag.
  • Enable/Shutdown Control.
  • Extended Junct.

📥 Download Datasheet

Datasheet preview – NCS5651

Datasheet Details

Part number NCS5651
Manufacturer ON Semiconductor
File Size 214.97 KB
Description 2 Amp PLC Line Driver
Datasheet download datasheet NCS5651 Datasheet
Additional preview pages of the NCS5651 datasheet.

📁 Similar Datasheet

Other Datasheets by ON Semiconductor
  • NCS5650 - 2 Amp PLC Line Driver
  • NCS5652 - Dual Power Operational Amplifier
  • NCS1002 - Constant Voltage/Constant Current Secondary-Side Controller
  • NCS1002A - Constant Voltage/Constant Current Secondary-Side Controller
  • NCS12802 - 12-Channel I2C Programmable Gamma Voltage Reference Generator
  • NCS199A1 - Current-Shunt Monitor
  • NCS199A1R - Current-Shunt Monitors
  • NCS199A2 - Current-Shunt Monitor

Full PDF Text Transcription

Click to expand full text
NCS5651 2 Amp PLC Line Driver Description The NCS5651 is a high efficiency, Class A/B, low distortion power line driver. It is optimized to accept a signal from a Power Line Carrier modem. The device consists of two Operational Amplifiers (opamps). The output opamp is designed to drive up to 2 A peak into an isolation transformer or simple coil coupling to the mains. At an output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail giving the user improved SNR. In addition to the output amplifier, a small−signal opamp is provided which can be configured as a unity gain follower buffer or can provide the first stage of a 4−pole low pass filter.
Published: |