Datasheet4U Logo Datasheet4U.com

NCV51511 - High Side and Low Side Gate Driver

Description

Pin No.

Exposed PAD Description Logic and low side gate driver power supply voltage High side floating supply High side driver output High voltage floating supply return Logic input for

Features

  • low delay time and matched PWM input propagation delays, which further enhance the performance of the part. The high speed dual gate drivers are designed to drive both the high.
  • side and low.
  • side of N.
  • Channel MOSFETs in a half bridge or synchronous buck configuration. The floating high.
  • side driver is capable of operating with supply voltages of up to 80 V. In the dual gate driver, the high side and low side each have independent inputs to allow maximum flexibility.

📥 Download Datasheet

Datasheet Details

Part number NCV51511
Manufacturer onsemi
File Size 1.11 MB
Description High Side and Low Side Gate Driver
Datasheet download datasheet NCV51511 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV51563 4.5-A/9-A Isolated Dual Channel Gate Driver onsemi
NCV51153 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCV551 Low-Dropout Voltage Regulator ON
NCV2902 Single Supply Quad Operational Amplifiers ON
NCV3025833 Smart Power Stage onsemi

Other Datasheets by onsemi

Part Number Description
NCV51510 Termination Source / Sink Regulator
NCV51513 Automotive 130V High and Low Side Driver
NCV51561 Dual Channel Gate Driver
NCV5104 Half Bridge Driver
NCV5106A 600V Automotive High and Low Side Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com High-Frequency, High Side and Low Side Gate Driver NCV51511 The NCV51511 is high side and low side gate−drive IC designed for high−voltage, high−speed, driving MOSFETs operating up to 80 V. The NCV51511 integrates a driver IC and a bootstrap diode. The driver IC features low delay time and matched PWM input propagation delays, which further enhance the performance of the part. The high speed dual gate drivers are designed to drive both the high−side and low−side of N−Channel MOSFETs in a half bridge or synchronous buck configuration. The floating high−side driver is capable of operating with supply voltages of up to 80 V.
Published: |