Datasheet4U Logo Datasheet4U.com

AN8014 - Step-down/ step-up/ or inverting DC-DC converter controller

📥 Download Datasheet

Datasheet Details

Part number AN8014
Manufacturer Panasonic
File Size 151.96 KB
Description Step-down/ step-up/ or inverting DC-DC converter controller
Datasheet download datasheet AN8014 Datasheet

General Description

s Pin No.

1 2 3 4 5 Description Internal reference output Oscillator timing resistor connection Oscillator timing capacitor connection Dead-time control Capacitance connection for short-circuit protection delay 6 7 8 Error amplifier noninverting input Error amplifier inverting input Error amplifier output Pin No.

9 10 11 12 13 14 15 16 Voltage regulators Description Not connected Overcurrent protection input Signal ground Output stage ground

Overview

Voltage regulators AN8014S Step-down, step-up, or inverting DC-DC converter control IC s Overview The AN8014S is a single-channel PWM DC-DC converter control IC.

This IC can provide any one output type from among step-down, step-up and inverting output.

Allowing n-channel power MOSFET direct driving, the AN8014S is ideal for high-efficiency power supplies.

Key Features

  • Wide operating supply voltage range (3.6 V to 34 V) (The voltage is limited within a range between 3.6 V and 17 V if it is connected to a step-down volt1.27 (0.605) 0.40±0.25 age circuit. ) Seating plane.
  • Totem pole output circuit: output peak current (±1 A) SOP016-P-0225A.
  • On-chip pulse-by-pulse overcurrent detection and protection circuit Threshold voltage VCC.
  • 0.095 V typical.
  • On-chip bootstrap circuit (allowing n-channel MOSFET direct driving. ).

More Datasheets from Panasonic

Part Number Description
AN8014S Step-down/ step-up/ or inverting DC-DC converter controller
AN8010 3-pin/ positive output/ low dropout voltage regulator
AN8010M 3-pin/ positive output/ low dropout voltage regulator
AN8011S 2-channel step-down/ step-up/ or inverting use DC-DC converter controller
AN8013SH Single-channel step-up or step-down DC-DC converter controller
AN8015SH Single-channel step-down/ step-up/ or inverting use DC-DC converter controller
AN8016 Single-channel 1.8-volt step-up DC-DC converter controller
AN8016NSH Single-channel 1.8-volt step-up DC-DC converter controller
AN8017SA 1.8-volt 2-channel step-up DC-DC converter controller
AN8018SA 1.8-volt 2-channel step-up/ step-down/ or inverting DC-DC converter controller