Datasheet4U Logo Datasheet4U.com

AN8011S - 2-channel step-down/ step-up/ or inverting use DC-DC converter controller

General Description

Pin No.

Pin for connecting the oscillation frequency setting capacitor for triangular oscillation circuit.

Frequecy of triangular oscillation is set by connecting a capacitor between this terminal and GND.

Key Features

  • PWM control frequency of 500 kHz is available.
  • Wide operating supply voltage range 1.27 (0.605) 0.40±0.25 (VCC = 3.6 V to 34 V) Seating plane Seating plane.
  • Built-in 2-channel of open collector type for output (A single-channel is also usable for inverted SOP016-P-0225A amplification type).
  • Each output can be stopped independently by the external control.
  • Built-in on/off function for the operation/stop of IC Incorporating circuit for short-circui.

📥 Download Datasheet

Datasheet Details

Part number AN8011S
Manufacturer Panasonic
File Size 161.91 KB
Description 2-channel step-down/ step-up/ or inverting use DC-DC converter controller
Datasheet download datasheet AN8011S Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN80196CA ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 Intel Corporation
AN80196CB ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 Intel Corporation
AN804 P-Channel MOSFET Vishay Siliconix
AN805 PWM Optimized Power MOSFET Vishay Siliconix
AN8053N 1.0W Power Amplifier Matsushita

Other Datasheets by Panasonic

Part Number Description
AN8010 3-pin/ positive output/ low dropout voltage regulator
AN8010M 3-pin/ positive output/ low dropout voltage regulator
AN8013SH Single-channel step-up or step-down DC-DC converter controller
AN8014 Step-down/ step-up/ or inverting DC-DC converter controller
AN8014S Step-down/ step-up/ or inverting DC-DC converter controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Voltage Regulators AN8011S 2-channel step-down, step-up, or inverting use DC-DC converter control IC Unit: mm s Overview The AN8011S is a DC-DC converter control IC with two-channel output using the PWM method which allows 500 kHz high-speed control. Respecitve output operation can be completely synchronized with each other by using the same oscillation output. 16 10.1±0.3 9 4.2±0.3 6.5±0.3 (0.15) 0.3 1.5±0.2 (0° to 10°) 1 8 s Features • PWM control frequency of 500 kHz is available. • Wide operating supply voltage range 1.27 (0.605) 0.40±0.25 (VCC = 3.