Datasheet4U Logo Datasheet4U.com

AN8014 - Step-down/ step-up/ or inverting DC-DC converter controller

General Description

Pin No.

Key Features

  • Wide operating supply voltage range (3.6 V to 34 V) (The voltage is limited within a range between 3.6 V and 17 V if it is connected to a step-down volt1.27 (0.605) 0.40±0.25 age circuit. ) Seating plane.
  • Totem pole output circuit: output peak current (±1 A) SOP016-P-0225A.
  • On-chip pulse-by-pulse overcurrent detection and protection circuit Threshold voltage VCC.
  • 0.095 V typical.
  • On-chip bootstrap circuit (allowing n-channel MOSFET direct driving. ).

📥 Download Datasheet

Datasheet Details

Part number AN8014
Manufacturer Panasonic
File Size 151.96 KB
Description Step-down/ step-up/ or inverting DC-DC converter controller
Datasheet download datasheet AN8014 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN80196CA ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 Intel Corporation
AN80196CB ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 Intel Corporation
AN804 P-Channel MOSFET Vishay Siliconix
AN805 PWM Optimized Power MOSFET Vishay Siliconix
AN8053N 1.0W Power Amplifier Matsushita

Other Datasheets by Panasonic

Part Number Description
AN8014S Step-down/ step-up/ or inverting DC-DC converter controller
AN8010 3-pin/ positive output/ low dropout voltage regulator
AN8010M 3-pin/ positive output/ low dropout voltage regulator
AN8011S 2-channel step-down/ step-up/ or inverting use DC-DC converter controller
AN8013SH Single-channel step-up or step-down DC-DC converter controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Voltage regulators AN8014S Step-down, step-up, or inverting DC-DC converter control IC s Overview The AN8014S is a single-channel PWM DC-DC converter control IC. This IC can provide any one output type from among step-down, step-up and inverting output. Allowing n-channel power MOSFET direct driving, the AN8014S is ideal for high-efficiency power supplies. 10.1±0.3 16 9 Unit: mm 4.2±0.3 6.5±0.3 (0.15) 0.3 (0° to 10°) s Features • Wide operating supply voltage range (3.6 V to 34 V) (The voltage is limited within a range between 3.6 V and 17 V if it is connected to a step-down volt1.27 (0.605) 0.40±0.25 age circuit.