AN8014S Description
Internal reference output Oscillator timing resistor connection Oscillator timing capacitor connection Dead-time control Capacitance connection for short-circuit protection delay 6 7 8 Error amplifier noninverting input Error amplifier inverting input Error amplifier output Pin No. Except for the operating ambient temperature and storage temperature, all ratings are for Ta = 25°C. Do not apply external currents or...
AN8014S Key Features
- Wide operating supply voltage range (3.6 V to 34 V) (The voltage is limited within a range between 3.6 V and 17 V if it
- Totem pole output circuit: output peak current (±1 A) SOP016-P-0225A
- On-chip pulse-by-pulse overcurrent detection and protection circuit Threshold voltage VCC
- 0.095 V typical
- On-chip bootstrap circuit (allowing n-channel MOSFET direct driving.)
- On-chip under-voltage lock-out circuit (U.V.L.O.)
- On-chip on/off function (active-high control input, standby current of maximum 5 µA)
- On-chip timer latch short-circuit protection circuit
- Maximum oscillator frequency (500 kHz)