Datasheet4U Logo Datasheet4U.com

AN8015SH Datasheet Single-channel Step-down/ Step-up/ Or Inverting Use DC-dc Converter Controller

Manufacturer: Panasonic

Overview: Voltage Regulators AN8015SH Single-channel step-down, step-up, or inverting use DC-DC converter control IC Unit: mm s Overview The AN8015SH is a single-channel DC-DC converter control IC using the PWM method. This IC can provide any one output type from among step-down, step-up and inverting output. Its operating supply voltage range is wide and its consumption current is small. In addition, since it uses the 10-pin surface mounting type package with 0.5 mm pitch, it is suitable for highly efficient miniature potable power supply, especially for a negative output power supply. 3.0±0.30 1 10 0.2±0.1 0.625±0.10 0.5 5 6 0.1±0.

General Description

s Pin No.

1 2 3 4 5 6 7 8 9 10 Symbol CT RT S.C.P.

GND Out VCC VREF IN+ IN− FB Description Pin for connecting oscillator timing capacitor Pin for connecting oscillator timing resistor Voltage Regulators Pin for connecting the time const

Key Features

  • 4.3±0.30 6.3±0.30.
  • Wide operating supply voltage range (3.6 V to 34 V).
  • Small consumption current (1.8 mA typical) SSOP010-P-0225.
  • Converter control in a wide output frequency range is possible (2 kHz to 500 kHz).
  • Built-in timer latch short-circuit protection circuit (charge current 1.1 µA typical).
  • Incorporating the under-voltage lock-out (U. V. L. O. ) circuit.
  • Incorporating a high precision reference voltage circuit (2.46 V (allowance: ± 3%.

More Datasheets from Panasonic

Part Number Description
AN8010 3-pin/ positive output/ low dropout voltage regulator
AN8010M 3-pin/ positive output/ low dropout voltage regulator
AN8011S 2-channel step-down/ step-up/ or inverting use DC-DC converter controller
AN8013SH Single-channel step-up or step-down DC-DC converter controller
AN8014 Step-down/ step-up/ or inverting DC-DC converter controller
AN8014S Step-down/ step-up/ or inverting DC-DC converter controller
AN8016 Single-channel 1.8-volt step-up DC-DC converter controller
AN8016NSH Single-channel 1.8-volt step-up DC-DC converter controller
AN8017SA 1.8-volt 2-channel step-up DC-DC converter controller
AN8018SA 1.8-volt 2-channel step-up/ step-down/ or inverting DC-DC converter controller

AN8015SH Distributor