Datasheet4U Logo Datasheet4U.com

AN8013SH Datasheet Single-channel Step-up Or Step-down DC-dc Converter Controller

Manufacturer: Panasonic

Overview: Voltage Regulators AN8013SH Single-channel step-up or step-down DC-DC converter control IC Unit: mm s Overview The AN8013SH is a single-channel PWM DC-DC converter control IC. This IC implements DC-DC converters that provide a single arbitrary output voltage that is either a stepped-up or stepped-down level.

General Description

s • Supports control over a wide output frequency range: 20 kHz to 500 kHz.

CLM 1 • Built-in pulse-by-pulse overcurrent protection circuit 2 RT 3 CT (Detection voltage: VCC − 100 mV) S.C.P.

4 • Built-in timer latch short-circuit protection circuit DTC 5 (charge current 1.3 µA typical) • Incorporating the under-voltage lock-out (U.V.L.O.) circuit • Built-in reference voltage circuit (Error amplifier reference input: 0.75 V (allowance: ±4%)) • Output block is open-collector (darlington) type.

Key Features

  • a wide operating supply voltage range, low power, and a built-in overcurrent protection circuit to protect the switching transistor from damage or destruction. The AN8013SH is provided in a 0.5 mm pitch 10-pin surface mounting package and is optimal for use in miniature high-efficiency portable power supplies. 3.0±0.30 1.5±0.2 1 10 0.2±0.1 0.625±0.10 0.625±0.10 0.5 5 6 0.1±0.1 4.3±0.30 6.3±0.30 s Features.
  • Wide operating supply voltage range (3.6 V to 34 V).
  • Small consu.

More Datasheets from Panasonic

Part Number Description
AN8010 3-pin/ positive output/ low dropout voltage regulator
AN8010M 3-pin/ positive output/ low dropout voltage regulator
AN8011S 2-channel step-down/ step-up/ or inverting use DC-DC converter controller
AN8014 Step-down/ step-up/ or inverting DC-DC converter controller
AN8014S Step-down/ step-up/ or inverting DC-DC converter controller
AN8015SH Single-channel step-down/ step-up/ or inverting use DC-DC converter controller
AN8016 Single-channel 1.8-volt step-up DC-DC converter controller
AN8016NSH Single-channel 1.8-volt step-up DC-DC converter controller
AN8017SA 1.8-volt 2-channel step-up DC-DC converter controller
AN8018SA 1.8-volt 2-channel step-up/ step-down/ or inverting DC-DC converter controller

AN8013SH Distributor