AN8017SA Description
Pin for connecting a oscillation timing resistor and capacitor 2 S.C.P. Symbol 8 9 10 11 GND VCC Out2 RB2 Description Grounding pin Power supply voltage application pin Out2 block push-pull type output pin Out2 block output source current setting resistor connection pin PWM2 block.
AN8017SA Key Features
- Wide operating supply voltage range (1.8 V to 14 V) Seating plane 0.22
- Incorporating a high precision reference voltage circuit (allowance: ± 2%) SSOP016-P-0225A
- Control in a wide output frequency range is possible (20 kHz to 1 MHz)
- Built-in wideband error amplifier (single gain bandwidth: 10 MHz typical)
- A built-in timer latch short-circuit protection circuit (charge current: 1.1 µA typical)
- Incorporating an under-voltage lock-out circuit (U.V.L.O.) (circuit operation-starting voltage: 1.67 V typical)
- Dead-time is variable
- Flatness of switching current can be obtained by staggering the turn-on timing of each channel
- Built-in unlatch function When DT1 pin is low level or DT2 pin is high level, independent turn-off is possible
- Incorporating an on/off control function (active-high control input, standby mode current: 1 µA maximum)