Datasheet4U Logo Datasheet4U.com

HD74BC374A - Octal D Type Flip Flops

General Description

The HD74BC374A provides high drivability and operation equal to or better than high speed bipolar standard logic IC by using Bi-CMOS process.

Key Features

  • low power dissipation that is about 1/5 of high speed bipolar logic IC, when the frequency is 10 MHz. The device has eight edge triger D type flip flop with three state outputs in a 20 pin package. Data at the D inputs meeting set up reguirements, are transferred to the Q outputs on positive going transitions of the clock input. When the latch enable goes low, data at the D inputs will be retained at the outputs until latch enable returns high again. When a high logic level is applied to the out.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74BC374A Octal D Type Flip Flops With 3 State Outputs Hitachi Semiconductor
HD74BC373A Octal D Type Transparent Latches With 3 State Outputs Hitachi Semiconductor
HD74BC240A Octal Buffers/Line Drivers With 3 State Outputs Hitachi Semiconductor
HD74BC244A Octal Buffers/Line Drivers With 3 State Outputs Hitachi Semiconductor
HD74BC245A Octal Bus Transceivers With 3 State Outputs Hitachi Semiconductor

Other Datasheets by Renesas

Part Number Description
HD74BC373A Octal D Type Transparent Latches
HD74BC240A Octal Buffers/Line Drivers
HD74BC244A Octal Buffers/Line Drivers
HD74BC245A Octal Bus Transceivers
HD74BC540A Octal Buffers/Line Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74BC374A Octal D Type Flip Flops With 3 State Outputs REJ03D0284–0300Z (Previous ADE-205-010A (Z)) Rev.3.00 Jul.16.2004 Description The HD74BC374A provides high drivability and operation equal to or better than high speed bipolar standard logic IC by using Bi-CMOS process. The device features low power dissipation that is about 1/5 of high speed bipolar logic IC, when the frequency is 10 MHz. The device has eight edge triger D type flip flop with three state outputs in a 20 pin package. Data at the D inputs meeting set up reguirements, are transferred to the Q outputs on positive going transitions of the clock input. When the latch enable goes low, data at the D inputs will be retained at the outputs until latch enable returns high again.